User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

= Experiment Name =

Hobart 12m:

Disk VSN:

Data volume at beginning:

Katherine 12m:

Disk VSN:

Data volume at beginning:

Yarragadee 12m:

Disk VSN:

Data volume at beginning:

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R4995

Yarragadee 12m

Disk VSN: HOB+1007/16000/1024 | Data volume at beginning: 14049.708 GB

  • 1830UT Experiment started okay (Jay).
2021/04/22 18:12 · Jayender Kumar · 0 Comments
AUM033

Hobart 12m

Disk VSN: flexbuffhb | Data volume at beginning: TB

  • 1800UT Experiment started ok(Eloise)

Katherine 12m

Disk VSN: flexbuffke | Data volume at beginning: TB

  • 1800UT Experiment started ok, antenna stuck briefly before experiment started - had to reboot system (antenna=open didn't work) (Eloise)
  • 2220UT Antenna communication issues since early morning, resolved with antenna=open (Eloise)

Yaragadee 12m

Disk VSN: HOB+1007/16000/1024 | Data volume at beginning: TB

  • 1800UT Experiment started ok (Eloise)
2021/04/21 17:47 · Wilson-Mayne · 0 Comments
aua075

Hobart 12m

Disk VSN: flexbuffhb | Data volume at beginning: TB

  • 1730UT exp started ok
  • 1145UT Issues with antenna, system had to be rebooted. Started recording again at ~1210UT (Eloise, done by Warren just before my shift)

Katherine 12m

Disk VSN: flexbuffke | Data volume at beginning: TB

  • No data was being recorded. Multiple resets of dbbc and running setup seemed to work. Recording started at 1954UT.

Yarragadee 12m

Disk VSN: HOB+1007/16000/1024 | Data volume at beginning: 0 GB

  • 1730UT Exp started ok

Hobart 26m

Disk VSN: | Data volume at beginning: GB

  • The receiver was changed to the L-band an hour prior to the experiment. So the timed start recorded at the wrong frequency for the first hour. Some monitoring related issues showed up. Experiment started recording at 1922UT.
2021/04/20 15:57 · Pradyumna Kiran Kummamuru · 0 Comments
R1995

Yarragadee 12m

Disk VSN: MPI+0817| Data volume at beginning: 4721.238 GB

  • 1700UT Experiment started okay (Jay).
2021/04/19 16:51 · Jayender Kumar · 0 Comments
r4994

Yarragadee 12m

Disk VSN:MPI+0817/8000 | Data volume at beginning: 3189 GB

  • 1830UT Experiment started okay (Pradyumna).
2021/04/15 13:56 · Pradyumna Kiran Kummamuru · 0 Comments
aum032

Hobart 12m

Disk VSN: flexbuffhb | Data volume at beginning: 50 TB

  • Lots of wind stows 22:00-00:30 UT (Warren)
  • 00:00 UT dbbc3hb samplers “bad” since experiment start. reconfigure (w)
  • 01:30 UT power cycle dbbc3hb, reconfigure and setup again, still wind stowed (w)
  • 01:50 UT dbbc3hb sampler 3 still reports “bad” sampler 4 OK (w)
  • 01:47 UT wind stow again (w)
  • 02:15 UT schedule resumed (w)
  • 02:20 UT dbbc3hb sampler 3 and 4 report “bad”
  • 02:30 UT dbbc3hb sampler 3 reports “bad”(w)
  • 04:30 UT wind stowed again (w)
  • 05:00 UT wind stowed again (w)
  • 05:15 UT out of wind stow (w)
  • 7:000 (approx) wind stow
  • 1300UT sampler 3 still bad, still recording (eloise)

Katherine 12m

Disk VSN: flexbuffke | Data volume at beginning: 30 TB

  • sampler 2 always reading bad (w)
  • 04:30 UT sampler 2 and 3 reading bad, reconfigure (w)
  • 05:10 UT schedule resumed. now sampler 3 4 read bad. Lim suggests do not reconfigure any more during session as long as recording OK (w)
  • 1300 UT sampler 3 and 4 still bad, but still recording (eloise)

Yarragadee 12m

Disk VSN: | Data volume at beginning: GB

  • 1300UT Antenna pointing problems, and network out. Not observing. (W).
  • 10:49 - good data recorded
2021/04/14 00:20 · Warren Hankey · 0 Comments
/home/www/auscope/opswiki/data/attic/operations/handover.1430724119.txt.gz · Last modified: 2015/05/04 07:21 by liza