operations:rf_if_check

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

RF and IF Configuration

Check the Status Monitor to see if the Cross-over switches and RCP IF Attenuators are at the default levels:

At all sites, cross-over switches should be Direct
IF Attenuator settings should be as follows
- At Hobart:
  - S RCP : 0.0 dB
  - X RCP : 12.0 dB
- At Katherine
  - S RCP : 15.5 dB
  - X RCP : 8.5 dB
- At Yarragadee
  - S RCP : 3.0 dB
  - X RCP : 0.0 dB

If these values are not correct, they will need adjusting. See: Current Issues Crossover Switches at Katherine

/home/www/auscope/opswiki/data/attic/operations/rf_if_check.1360638171.txt.gz · Last modified: 2013/02/12 03:02 by jayb