User Tools
operations:rpiips
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:rpiips [2019/09/02 03:53] Jim Lovell [Network] |
operations:rpiips [2021/03/25 19:28] (current) Guifre |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | **Paged moved** | ||
| ====== IPSPi1Hb: Raspberry Pi Internet Power Switch ====== | ====== IPSPi1Hb: Raspberry Pi Internet Power Switch ====== | ||
| Line 4: | Line 5: | ||
| ===== IPS Usage ===== | ===== IPS Usage ===== | ||
| + | |||
| + | Current configuration of ipspi1Hb | ||
| + | |||
| + | |||
| + | | PS1 | PS2 | PS3 | PS4 | PS5 | PS6 | PS7 | | ||
| + | |- | ||
| + | | FlexbuffHb 1 | Universal counter | Laser PSU | - | FlexbuffHb 2 | External PS | External PS | | ||
| + | |||
| + | External PS: External Power supply provide current to the two RF to Optics + RF filters. We need two since a 5 and a 12 Volts are required. | ||
| + | |||
| + | dbbc3 is powered up directly from a separate UPS. We don't want to overload the system. | ||
| ==== Local control ==== | ==== Local control ==== | ||
| Line 35: | Line 47: | ||
| ===== Remote Switch Usage ===== | ===== Remote Switch Usage ===== | ||
| - | These are small power-socket mounted switches for remote control of whatever device is plugged into them. Once set up, the switch can be controlled locally via a button or remotely from the IPS via the Switch Interface software. Th switches share information about their state with some server software on the IPS and can receive remote commands from the IPS too. Because the switches are designed to use the WiFi network intermittently, they check in with the server at regular (configurable) intervals to synchronise state information and process any pending commands. If a device is turned on or off locally after a remote (software) command has been sent, then the local operation takes precedence. Likewise, if the remote command is the most recent, it is executed at the next check-in. | + | These are small power-socket mounted switches for remote control of whatever device is plugged into them. Once set up, the switch can be controlled locally via a button or remotely from the IPS via the Switch Interface software. The switches share information about their state with some server software on the IPS and can receive remote commands from the IPS too. Because the switches are designed to use the WiFi network intermittently, they check in with the server at regular (configurable) intervals to synchronise state information and process any pending commands. If a device is turned on or off locally after a remote (software) command has been sent, then the local operation takes precedence. Likewise, if the remote command is the most recent, it is executed at the next check-in. |
| The switches operate in two modes: setup and operating. | The switches operate in two modes: setup and operating. | ||
/home/www/auscope/opswiki/data/attic/operations/rpiips.1567396385.txt.gz · Last modified: 2019/09/02 03:53 by Jim Lovell
Page Tools
