This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- operations:rpiips [2019/10/15 04:01]
Guifre [IPS Usage]
+++ operations:rpiips [2021/03/25 19:28] (current)
Guifre
@@ Line 1: / Line 1: @@
+**Paged moved**
 ====== IPSPi1Hb: Raspberry Pi Internet Power Switch ======
@@ Line 6: / Line 7: @@
 Current configuration of ipspi1Hb
-{|
-|-
-|Cell 1 || Cell 2 || Cell 3
-|-
-|Cell A
-|Cell B
-|Cell C
-|}
-{|
+| PS1 | PS2 | PS3 | PS4 | PS5 | PS6 | PS7 |
 |-
-! PS1
+| FlexbuffHb 1 | Universal counter | Laser PSU | - | FlexbuffHb 2 | External PS | External PS |
-! PS2
-! PS3
+External PS: External Power supply provide current to the two RF to Optics + RF filters. We need two since a 5 and a 12 Volts are required.
-! PS4
-!  x
+dbbc3 is powered up directly from a separate UPS. We don't want to overload the system.
-! PS5
-! PS6
-! PS7
-|-
-| FlexbuffHb 1
-| Universal counter
-| Laser PSU
-|
-| FlexbuffHb 2
-| External PS
-| External PS
-|}
 ==== Local control ====
 The front panel of the IPS consists of an Enable button and one button to control each of the 7 connected devices. There is a LED in each control button that indicates if power is on to the device. To avoid accidental toggling, the Enable button must be held on when controlling power to a device and released between button presses.