User Tools

Site Tools


operations:starting_fs

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Starting the PC Field System Software

The following steps are done through the Field System. If not already started, start the Field system software on pcfs[hb|ke|yg] by starting a new terminal in the VNC session on pcfs[hb|ke|yg], and type:

fs

You may see error messages concerning the Mark5 or DBBC but these can be ignored for now. An Operator Input window will appear and Field System commands are typed here.

/home/www/auscope/opswiki/data/attic/operations/starting_fs.1363223003.txt.gz · Last modified: 2013/03/14 01:03 by Jim Lovell