User Tools
operations:starting_monitoring_v2
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
operations:starting_monitoring_v2 [2012/09/04 05:28] Jim Lovell created |
operations:starting_monitoring_v2 [2012/09/20 02:09] (current) Jim Lovell [Starting and Monitoring IVS sessions] |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| [[operations:startmessage|Then send a start message to IVS]]. | [[operations:startmessage|Then send a start message to IVS]]. | ||
| - | During the experiment, the following checks can be made. Please log them using the new Checklist GUI: | + | Every two hours during the experiment eRemoteControl will bring up a checklist. Please run through the checklist when it appears (you may need to drag the window to a larger size to see the whole interface). Use this in preference to the old stand-alone checklist GUI. A description of the checklist parameters and what to look out for is available here: |
| - | + | * [[operations:documentation.eRemoteControl_checklist_midob|Description of checklist parameters]] | |
| - | * [[software:auscope_checklist|Using the Checklist GUI]] | + | <note warning>Note that pressing the "Print" button next to the disk status display in eRemoteControl can cause the software to crash! When moving or resizing the checklist, be careful not to accidentally hit the Print button. (This bug has been reported to the developers by the way)</note> |
| - | Please go through the checklist as often as you like but **at least once every 2 hours**. A description of the checklist parameters and what to look out for is available here: | + | The **system monitor** provides a useful summary of the drives & other Monica parameters. You can run it on ops2, ops4 or ops5 with the command ''monitor_system.pl'' or from the drop-down menu on the desktop "Applications -> AuScope -> Monitor System". Run it once for each site. |
| - | * [[operations:checklist_parameters|Description of checklist parameters]] | + | |
| - | The **system monitor** provides a useful summary of the drives & other Monica parameters. You can run it on ops4 or ops5 with the command ''monitor_system.pl'' or from the drop-down menu on the desktop "Applications -> AuScope -> Monitor System". Run it once for each site. | + | |
| You can launch clock displays too from the "Applications -> AuScope" menu. | You can launch clock displays too from the "Applications -> AuScope" menu. | ||
| - | It's best to only have the Katherine and Yarragadee VNC sessions running when running through the checklist and to rely on econtrol, the system monitor and the log monitor the rest of the time. You should use the VNC sessions to check that the autocorrelation spectra are OK though. | + | It's best to only have the Katherine and Yarragadee VNC sessions running when running through the checklist and to rely on eRemoteControl, the system monitor and the log monitor the rest of the time. You should use the VNC sessions to check that the autocorrelation spectra are OK though. |
| [[http://auscope.phys.utas.edu.au/webcams_etc.html|This web page]] provides a one-page summary of the webcams and weather radar. | [[http://auscope.phys.utas.edu.au/webcams_etc.html|This web page]] provides a one-page summary of the webcams and weather radar. | ||
/home/www/auscope/opswiki/data/attic/operations/starting_monitoring_v2.1346736481.txt.gz · Last modified: 2012/09/04 05:28 by Jim Lovell
Page Tools
