User Tools
operations:starting_monitoring_v2
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
operations:starting_monitoring_v2 [2012/09/04 05:38] Jim Lovell [Starting and Monitoring IVS sessions] |
operations:starting_monitoring_v2 [2012/09/20 02:09] (current) Jim Lovell [Starting and Monitoring IVS sessions] |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| Every two hours during the experiment eRemoteControl will bring up a checklist. Please run through the checklist when it appears (you may need to drag the window to a larger size to see the whole interface). Use this in preference to the old stand-alone checklist GUI. A description of the checklist parameters and what to look out for is available here: | Every two hours during the experiment eRemoteControl will bring up a checklist. Please run through the checklist when it appears (you may need to drag the window to a larger size to see the whole interface). Use this in preference to the old stand-alone checklist GUI. A description of the checklist parameters and what to look out for is available here: | ||
| * [[operations:documentation.eRemoteControl_checklist_midob|Description of checklist parameters]] | * [[operations:documentation.eRemoteControl_checklist_midob|Description of checklist parameters]] | ||
| + | <note warning>Note that pressing the "Print" button next to the disk status display in eRemoteControl can cause the software to crash! When moving or resizing the checklist, be careful not to accidentally hit the Print button. (This bug has been reported to the developers by the way)</note> | ||
| The **system monitor** provides a useful summary of the drives & other Monica parameters. You can run it on ops2, ops4 or ops5 with the command ''monitor_system.pl'' or from the drop-down menu on the desktop "Applications -> AuScope -> Monitor System". Run it once for each site. | The **system monitor** provides a useful summary of the drives & other Monica parameters. You can run it on ops2, ops4 or ops5 with the command ''monitor_system.pl'' or from the drop-down menu on the desktop "Applications -> AuScope -> Monitor System". Run it once for each site. | ||
/home/www/auscope/opswiki/data/attic/operations/starting_monitoring_v2.1346737105.txt.gz · Last modified: 2012/09/04 05:38 by Jim Lovell
Page Tools
