This shows you the differences between two versions of the page.
operations:temphumidmonitor_rpisetup [2019/03/25 21:21] Jim Lovell created |
operations:temphumidmonitor_rpisetup [2019/05/13 23:10] (current) Jim Lovell [Network config] |
||
---|---|---|---|
Line 13: | Line 13: | ||
* For masertempke the IP address should be 131.217.61.28. | * For masertempke the IP address should be 131.217.61.28. | ||
* For antennatempke the IP address should be 131.217.61.29. | * For antennatempke the IP address should be 131.217.61.29. | ||
+ | * For antennatempyg the IP address should be 131.217.61.80. | ||
+ | * For antennatemphb the IP address should be 131.217.63.4. | ||
Edit ''/etc/dhcpcd.conf'': | Edit ''/etc/dhcpcd.conf'': | ||
+ | |||
+ | For Katherine or Yarragadee: | ||
<code> | <code> | ||
Line 21: | Line 25: | ||
# /26 = netmask of 255.255.255.192 | # /26 = netmask of 255.255.255.192 | ||
static routers=131.217.61.1 | static routers=131.217.61.1 | ||
+ | static domain_name_servers=131.217.0.19 | ||
+ | </code> | ||
+ | |||
+ | For Hobart: | ||
+ | <code> | ||
+ | interface eth0 | ||
+ | static ip_address=131.217.63.4/24 | ||
+ | static routers=131.217.63.1 | ||
static domain_name_servers=131.217.0.19 | static domain_name_servers=131.217.0.19 | ||
</code> | </code> | ||
Line 27: | Line 39: | ||
Reboot. | Reboot. | ||
- | |||
==== Packages installed ==== | ==== Packages installed ==== | ||
[[operations:temphumidmonitorrpi|Configuring Raspberry Pis for Temperature and Humidity monitoring]] | [[operations:temphumidmonitorrpi|Configuring Raspberry Pis for Temperature and Humidity monitoring]] |