This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
handover:crds98 [2018/09/26 22:21] Lucas Hyland |
handover:crds98 [2018/10/01 23:09] Lucas Hyland |
||
---|---|---|---|
Line 6: | Line 6: | ||
* CRDS98 was unable to be slogged. This seems to be due to the schedule coming in vex format. | * CRDS98 was unable to be slogged. This seems to be due to the schedule coming in vex format. | ||
- | * on newsmerd: $$ wget ftp://cddis.gsfc.nasa.gov/vlbi/ivsdata/aux/2018/crds98/crds98.vex $$ to download | + | * on newsmerd: <code>wget ftp://cddis.gsfc.nasa.gov/vlbi/ivsdata/aux/2018/crds98/crds98.vex</code> to download |
- | * then cp to /vlbobs/lba/crds98/ (make directory [mkdir /vlbobs/lba/crds98] if it does not exist) | + | * then cp to /vlbobs/lba/crds98/ on newsmerd (make directory [mkdir /vlbobs/lba/crds98] if it does not exist) |
- | * From ~/ on newsmerd, run slogit.lba.v4.sh OR slogit.lba.v3.sh. Look at the vex file, if it contains HOBART or HOBART26 (most likely) then v4. If is is HOB_DBBC or HOB_MK5 run v3. Do not download new file. vex must be in (e.g) /vlbobs/lba/crds98/ | + | * For hobart26m drudg, from ~/ on newsmerd, run <code>slogit.lba.v4.sh OR slogit.lba.v3.sh</code> Look at the vex file, if it contains HOBART or HOBART26 as the station name (most likely) then v4. If is is HOB_DBBC or HOB_MK5 run v3. **Do not download new file**. vex must be in (e.g) /vlbobs/lba/crds98/ |
- | * For ke and yg, run slogit.lbake.sh etc. | + | * For ke and yg, run <code>slogit.lbake.sh etc</code>. |
* Receiver was stuck slightly (~40 mm in x/y) off S/X. Moved to K-band [22GHz, number 8] receiver which is closest (see http://ra-wiki.phys.utas.edu.au/index.php?n=MtPleasant26m.ReceiverPositionsAndSystemTemperatures) then back to S/X [1] and this seemed to work. | * Receiver was stuck slightly (~40 mm in x/y) off S/X. Moved to K-band [22GHz, number 8] receiver which is closest (see http://ra-wiki.phys.utas.edu.au/index.php?n=MtPleasant26m.ReceiverPositionsAndSystemTemperatures) then back to S/X [1] and this seemed to work. | ||
* Got error from mk5=dot? Dot clock/mode not set? Decided to power cycle mk5hb and restart dimino with ./dim crds98ho. This worked and resolved the error and another error about NTP error. | * Got error from mk5=dot? Dot clock/mode not set? Decided to power cycle mk5hb and restart dimino with ./dim crds98ho. This worked and resolved the error and another error about NTP error. | ||
* 269.17:30:00 Experiment started okay (Lucas). | * 269.17:30:00 Experiment started okay (Lucas). | ||
+ | * Looks like hobart fs needs reboot, ERROR sc -8 setcl less than 30 days before time error, reboot as soon as possible. (Lucas). | ||
+ | * Almost all system temperature readings bad. Correct BBCs, rxp and LO. | ||
**Katherine 12m** | **Katherine 12m** |