User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!


Hobart 26m

Disk VSN: HOB-0106/16000 | Data volume at beginning: 0.00 GB

  • CRDS98 was unable to be slogged. This seems to be due to the schedule coming in vex format.
    • on newsmerd:

      to download

    • then cp to /vlbobs/lba/crds98/ on newsmerd (make directory [mkdir /vlbobs/lba/crds98] if it does not exist)
    • For hobart26m drudg, from ~/ on newsmerd, run OR

      Look at the vex file, if it contains HOBART or HOBART26 as the station name (most likely) then v4. If is is HOB_DBBC or HOB_MK5 run v3. Do not download new file. vex must be in (e.g) /vlbobs/lba/crds98/

    • For ke and yg, run etc


  • Receiver was stuck slightly (~40 mm in x/y) off S/X. Moved to K-band [22GHz, number 8] receiver which is closest (see then back to S/X [1] and this seemed to work.
  • Got error from mk5=dot? Dot clock/mode not set? Decided to power cycle mk5hb and restart dimino with ./dim crds98ho. This worked and resolved the error and another error about NTP error.
  • 269.17:30:00 Experiment started okay (Lucas).
  • Looks like hobart fs needs reboot, ERROR sc -8 setcl less than 30 days before time error, reboot as soon as possible. (Lucas).
  • Almost all system temperature readings bad. Correct BBCs, rxp and LO.

Katherine 12m

Disk VSN: HOB+0042/16000 | Data volume at beginning: 0.00 GB

  • 269.17:30:00 Experiment started okay (Lucas).

Yarragadee 12m

Disk VSN: GSFC+0180/8000 | Data volume at beginning: 0.00 GB

  • 269.17:30:00 Experiment started okay (Lucas).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/crds98.txt · Last modified: 2018/10/01 23:09 by Lucas Hyland