User Tools
operations:documentation_ops2
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
operations:documentation_ops2 [2012/08/15 02:14] Jim Lovell |
operations:documentation_ops2 [2012/08/15 04:38] Jim Lovell |
||
|---|---|---|---|
| Line 16: | Line 16: | ||
| There are four computers at each site that run the most important items of hardware or software. They are: | There are four computers at each site that run the most important items of hardware or software. They are: | ||
| - | ^Type ^ }} | + | ^Type ^ Function ^ Computer Name ^^^ Access with... ^ |
| - | + | ||
| - | Lastly, check that the software on the timing PCs is running | + | |
| - | * [[operations:documentation.ivs.timingsw|Software on the timing PC]] | + | |
| - | Function ^ Computer Name ^^^ Access with... ^ | + | |
| ^ ^ ^ Hobart ^ Katherine ^ Yarragadee ^ ^ | ^ ^ ^ Hobart ^ Katherine ^ Yarragadee ^ ^ | ||
| |PC Field System | Linux PC that runs Field System software to control the antenna, DBBC and Mark5 | pcfshb | pcfske | pcfsyg | ssh, VNC (display 1) | | |PC Field System | Linux PC that runs Field System software to control the antenna, DBBC and Mark5 | pcfshb | pcfske | pcfsyg | ssh, VNC (display 1) | | ||
| Line 73: | Line 69: | ||
| == Check the maser == | == Check the maser == | ||
| + | * [[operations:maser_check|Hydrogen Maser check]] | ||
| + | |||
| == DBBC Configuration == | == DBBC Configuration == | ||
| + | The Digital Base-Band Converter (DBBC) takes the IF signals from the telescope and digitises them for the Mark5 recorder. The DBBC needs to be properly configured prior to an observation: | ||
| + | * [[operations:documentation.DBBCSetupIVS_v2|Configuring the DBBC]] | ||
| + | |||
| == Mark5 Recorder setup == | == Mark5 Recorder setup == | ||
| - | == Clock and delay check == | + | Next the Mark5 recorder needs to be prepared for the observations. |
| + | * [[operations:documentation.ivs.mark5_v2|Mark5B recorder setup]] | ||
| + | |||
| + | == Clock and delay check == | ||
| + | * [[operations:documentation.clock_and_delay_check|Checking clock offsets and delays]] | ||
| + | |||
| + | |||
| == Test recording == | == Test recording == | ||
| + | * [[operations:documentation.test_recording|Making a test recording]] | ||
| + | |||
| + | |||
| + | |||
| == System Temperature (Tsys) check == | == System Temperature (Tsys) check == | ||
| == Antenna checks == | == Antenna checks == | ||
| Line 85: | Line 97: | ||
| - | The Digital Base-Band Converter (DBBC) takes the IF signals from the telescope and digitises them for the Mark5 recorder. The DBBC needs to be properly configured prior to an observation: | + | |
| - | * [[operations:documentation.DBBCSetupIVS|Configuring the DBBC]] | + | |
| - | Next the Mark5 recorder needs to be prepared for the observations. | + | |
| - | * [[operations:documentation.ivs.mark5|Mark5B recorder setup]] | + | |
| Lastly, check that the software on the timing PCs is running | Lastly, check that the software on the timing PCs is running | ||
| * [[operations:documentation.ivs.timingsw|Software on the timing PC]] | * [[operations:documentation.ivs.timingsw|Software on the timing PC]] | ||
/home/www/auscope/opswiki/data/pages/operations/documentation_ops2.txt · Last modified: 2012/09/18 06:18 by Jim Lovell
Page Tools
