This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:c1707_v1707 [2017/12/04 00:47]
Bryn Emptage
+++ handover:c1707_v1707 [2017/12/04 04:52] (current)
Bryn Emptage
@@ Line 1: / Line 1: @@
 ====== c1707/v1707 ======
-l
+**Hobart 12m**
+Disk VSN: HOB+0130
+Data volume at beginning: 0 GB
+   * 0004UT - Experiment Started Okay (Liz)
+   * 02:49UT - Missed scan 338-0248b, I think perhaps due to the same slow to slew problem as previous experiment. For the most part the telescope is tracking fine but sometimes not...(Liz)
+   * 0451UT - "previous source in this schedule not reached before new source was commanded" on scan 338-0450 (Tiege)
+**Katherine 12m**
+Disk VSN: USN+0224
+Data volume at beginning: 3491.4 GB
+   * 00:12UT - Experiment now okay, had to re-config dbbc from last experiment. Before first scan seemed okay but got sync_err3 after this. So halted sched etc to re-sync with fmset. Fine after this. eremote also died before first scan but fs vnc okay (Liz)
+**Yarragadee 12m**
+Disk VSN: USN+0225
+Data volume at beginning:  0 GB
+   * 00:00UT experiment started okay, but may have just missed start time due to module change. Would say first good scan was 338-0014 at 00:14UT just in case (Liz).
 {{tag>}}