User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!


Hobart 12m

Disk VSN: HOB+0130

Data volume at beginning: 0 GB

  • 0004UT - Experiment Started Okay (Liz)
  • 02:49UT - Missed scan 338-0248b, I think perhaps due to the same slow to slew problem as previous experiment. For the most part the telescope is tracking fine but sometimes not…(Liz)
  • 0451UT - “previous source in this schedule not reached before new source was commanded” on scan 338-0450 (Tiege)

Katherine 12m

Disk VSN: USN+0224

Data volume at beginning: 3491.4 GB

  • 00:12UT - Experiment now okay, had to re-config dbbc from last experiment. Before first scan seemed okay but got sync_err3 after this. So halted sched etc to re-sync with fmset. Fine after this. eremote also died before first scan but fs vnc okay (Liz)

Yarragadee 12m

Disk VSN: USN+0225

Data volume at beginning: 0 GB

  • 00:00UT experiment started okay, but may have just missed start time due to module change. Would say first good scan was 338-0014 at 00:14UT just in case (Liz).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/c1707_v1707.txt · Last modified: 2017/12/04 04:52 by Bryn Emptage