This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:crf115 [2019/12/11 21:31]
Warren Hankey
+++ handover:crf115 [2019/12/12 16:09] (current)
Warren Hankey
@@ Line 6: / Line 6: @@
   - 1800 UT Experiment started OK (mas)
-  - 21.30 UT halted schedule due to wind stowed. Missed scans 345-2128 through ... (mas)
+  - 21.30 UT halted schedule due to wind stowed. Missed scans 345-2128 through 345-2154 (mas)
+  - 21:54 UT back on source for 345-2154 still a bit windy (warren)
+  - 22:00 UT S/X receiver in position (manual) but display says rx 5 (w)
+  - 01:00 UT FS crash, simply restarting FS seemed to have fixed it, no related drive pc death. Potentially missed scans 0046 and 0100 (Tiege)
+  - 01:57 UT Source appears too low for scan 0200. (Tiege)
+  - 02:20UT - Windstow started (Tiege)
+  - @ ~ 8:00 UT - Original disk filled up, new disk (HOB+0092/8000/1024 with ~83% free space) installed (with some minor mishaps). Back on schedule (at least) by Scan 346-1116. Data difference now -944.37 GB (Sorry). Required FMSet resync, interrupting scan 346-1131. (Earl)
+  - 12:00UT - Module HOB+0092 is protected, so no data was being saved. Disabled protection with ''mk5=protect=off''. First good scan: 346-1219. (Patrick)
+  - 15:50UT - FS crash. Restarted FS & rebooted drives with ''rem_reboot -r rakbus sys26m''. Resumed schedule with 346-1612. Missed scans 346-1543 thru 346-1609.  (Patrick)