User Tools

Site Tools


handover:crf115

This wiki is not maintained! Do not use this when setting up AuScope experiments!

CRF115

Hobart 26m

Disk VSN: HOB+0127/32000 | Data volume at beginning: 27423.969 GB

  1. 1800 UT Experiment started OK (mas)
  2. 21.30 UT halted schedule due to wind stowed. Missed scans 345-2128 through 345-2154 (mas)
  3. 21:54 UT back on source for 345-2154 still a bit windy (warren)
  4. 22:00 UT S/X receiver in position (manual) but display says rx 5 (w)
  5. 01:00 UT FS crash, simply restarting FS seemed to have fixed it, no related drive pc death. Potentially missed scans 0046 and 0100 (Tiege)
  6. 01:57 UT Source appears too low for scan 0200. (Tiege)
  7. 02:20UT - Windstow started (Tiege)
  8. @ ~ 8:00 UT - Original disk filled up, new disk (HOB+0092/8000/1024 with ~83% free space) installed (with some minor mishaps). Back on schedule (at least) by Scan 346-1116. Data difference now -944.37 GB (Sorry). Required FMSet resync, interrupting scan 346-1131. (Earl)
  9. 12:00UT - Module HOB+0092 is protected, so no data was being saved. Disabled protection with mk5=protect=off. First good scan: 346-1219. (Patrick)
  10. 15:50UT - FS crash. Restarted FS & rebooted drives with rem_reboot -r rakbus sys26m. Resumed schedule with 346-1612. Missed scans 346-1543 thru 346-1609. (Patrick)
/home/www/auscope/opswiki/data/pages/handover/crf115.txt · Last modified: 2019/12/12 16:09 by Warren Hankey