User Tools
hardware:mark5.conditioning.postconchecks
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
hardware:mark5.conditioning.postconchecks [2012/09/05 05:16] Moblas people |
hardware:mark5.conditioning.postconchecks [2014/08/25 01:43] (current) Imogen Jones |
||
|---|---|---|---|
| Line 6: | Line 6: | ||
| >vsn? | >vsn? | ||
| >vsn? " need to enter twice to get a nice response" </code> | >vsn? " need to enter twice to get a nice response" </code> | ||
| + | |||
| + | <note warning>DO NOT use the following procedure if there is data on the module. Please ensure the data has had its data removed BEFORE changing the vsn</note> | ||
| + | |||
| Make sure the vsn is the same as the front label on the module. If it has been corrupted, you can change the vsn by entering: <code> | Make sure the vsn is the same as the front label on the module. If it has been corrupted, you can change the vsn by entering: <code> | ||
| >protect=off | >protect=off | ||
| >vsn=XXXsxxxx "eg vsn=BKG-0006" </code> | >vsn=XXXsxxxx "eg vsn=BKG-0006" </code> | ||
| + | |||
| To check the pointers are reset to 0: <code> | To check the pointers are reset to 0: <code> | ||
| >protect=off | >protect=off | ||
/home/www/auscope/opswiki/data/attic/hardware/mark5.conditioning.postconchecks.1346822190.txt.gz · Last modified: 2012/09/05 05:16 by Moblas people
Page Tools
