User Tools
operations:documentation:start_monica
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
|
operations:documentation:start_monica [2013/11/26 03:09] Jim Lovell created |
operations:documentation:start_monica [2016/10/05 17:30] (current) Jesse Swan [Monica for the 26m] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Starting the MONICA client ====== | ====== Starting the MONICA client ====== | ||
| - Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type: <code>ssh observer@ops-serv2</code> | - Open a terminal on ops-serv2. E.g. from ops2, open a terminal and type: <code>ssh observer@ops-serv2</code> | ||
| - | - Start the MONICA client. This should be done once for every antenna you want to monitor. Specifyh the Field System PC at the desired site. E.g. for Yarragadee: <code>./omc.sh</code> then select ''pcfsyg''. | + | - Start the MONICA client. This should be done once for every antenna you want to monitor. Specify the Field System PC at the desired site or ops-serv2 if you want to monitor network connectivity. E.g. for Yarragadee: <code>./omc.sh</code> then select ''pcfsyg''. |
| - A blank ''Monitor Display'' window will appear. | - A blank ''Monitor Display'' window will appear. | ||
| + | |||
| + | ====== If MONICA does not start at Hobart ====== | ||
| + | - ssh into pcfshb as root | ||
| + | - Now restart the client by entering: | ||
| + | <code> /etc/init.d/Monica.weather stop </code> | ||
| + | |||
| + | and then | ||
| + | |||
| + | <code> /etc/init.d/Monica.weather start </code> | ||
| + | |||
| + | ====== Monica for the 26m ====== | ||
| + | [[software:monica_26m_cryo|Monica for 26m Cryo]] | ||
/home/www/auscope/opswiki/data/attic/operations/documentation/start_monica.1385435395.txt.gz · Last modified: 2013/11/26 03:09 by Jim Lovell
Page Tools
