User Tools
operations:documentation.eremotecontrol_checklist_end
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
operations:documentation.eremotecontrol_checklist_end [2014/08/07 04:24] Jim Lovell |
operations:documentation.eremotecontrol_checklist_end [2014/08/13 05:56] (current) liza |
||
|---|---|---|---|
| Line 5: | Line 5: | ||
| * **Antenna: back in stow position**\\ Check the antenna status display in the system monitor window and check that the antenna has returned to stow. If not, issue a ''source=stow'' command. | * **Antenna: back in stow position**\\ Check the antenna status display in the system monitor window and check that the antenna has returned to stow. If not, issue a ''source=stow'' command. | ||
| * **Copy and paste relevant Handover notes from the wiki to the Additional Notes section below**\\ Go to the [[operations:handover|Handover notes]] page and copy any relevant notes for this antenna into the Additional Notes section of the checklist. | * **Copy and paste relevant Handover notes from the wiki to the Additional Notes section below**\\ Go to the [[operations:handover|Handover notes]] page and copy any relevant notes for this antenna into the Additional Notes section of the checklist. | ||
| - | * **Close this window, then process the log and send the end experiment email**\\ Not really a question but a request. Please submit this last checklist (so the output gets copied to the log), then process the log and send the end experiment email as described in the [[operations:documentation.ivs.finishing_v2|Finishing an observation]] section. You may need to defer this step if there is another experiment following immediately. | + | * **Close this window, then process the log and [[operations:documentation.ivs.commentsfile|send the end experiment email]]**\\ Not really a question but a request. Please submit this last checklist (so the output gets copied to the log), then process the log and send the end experiment email as described in the [[operations:documentation.ivs.finishing_v2|Finishing an observation]] section. You may need to defer this step if there is another experiment following immediately. |
/home/www/auscope/opswiki/data/attic/operations/documentation.eremotecontrol_checklist_end.1407385479.txt.gz · Last modified: 2014/08/07 04:24 by Jim Lovell
Page Tools
