User Tools
operations:temphumidmonitor_hardware
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:temphumidmonitor_hardware [2019/03/26 02:42] Jim Lovell [Connections for the DHT22 sensors to the RJ45 bus] |
operations:temphumidmonitor_hardware [2019/04/03 23:22] (current) Jim Lovell [Connections for the DHT22 sensors to the RJ45 bus] |
||
|---|---|---|---|
| Line 75: | Line 75: | ||
| Each one requires a connection to power and ground plus a unique GPIO port on the Raspberry Pi for data. The RJ45/CAT5 has 8 wires. Two are reserved for power and earth so that leaves 6 for sensors. The RJ45 terminal blocks have a different wire colouring to the CAT5 cable. Here's how they are allocated: | Each one requires a connection to power and ground plus a unique GPIO port on the Raspberry Pi for data. The RJ45/CAT5 has 8 wires. Two are reserved for power and earth so that leaves 6 for sensors. The RJ45 terminal blocks have a different wire colouring to the CAT5 cable. Here's how they are allocated: | ||
| - | ^ RJ45 Pin number ^ CAT5 wire colour ^ RJ45 terminal block wire colour ^ GPIO# or power assignment ^ | + | ^ RJ45 Pin number ^ CAT5 wire colour ^ RJ45 terminal block wire colour ^ GPIO# or power assignment ^ ID on unit ^ |
| - | | 1 | orange/white | grey | 4 | | + | | 1 | orange/white | grey | 4 | TH1 | |
| - | | 2 | orange | orange | 17 | | + | | 2 | orange | orange | 17 | TH2 | |
| - | | 3 | green/white | black | 18 | | + | | 3 | green/white | black | 18 | TH3 | |
| | 4 | blue | red | +3.3V | | | 4 | blue | red | +3.3V | | ||
| | 5 | blue/white | green | GND | | | 5 | blue/white | green | GND | | ||
| - | | 6 | green | yellow | 27 | | + | | 6 | green | yellow | 27 | TH4 | |
| - | | 7 | brown/white | blue | 22 | | + | | 7 | brown/white | blue | 22 | TH5 | |
| - | | 8 | brown | brown | 23 | | + | | 8 | brown | brown | 23 | TH6 | |
/home/www/auscope/opswiki/data/attic/operations/temphumidmonitor_hardware.1553568173.txt.gz · Last modified: 2019/03/26 02:42 by Jim Lovell
Page Tools
