User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


a1515

Hobart 12m

Module HOB+0100/16000, 13.5 GB used, Bank B

  • The 9TB jump from a1514 still leaves enough space for a1515 (4TB experiment), Jamie said that we should continue to use this module. (JS)
  • Hobart windsensor not working :( I tried to restart it but attempts failed :((
  • 08:05 UT bank change, recording on HOB+0110/16000/1024, -2389GB

Katherine 12M

Module HOB+0106/16000, 7.3 TB used, Bank B

Yarragadee

Module HOB+0102/16000, 12.1 TB used, Bank A

  • Ongoing DBBC issue causing problems in S band. (JS)
  • 02:20 UT - Antenna stuck. Restarted at 02:30 UT missing scans: 060-0220 to 060-0234 (vk)
  • 02:52 UT - Antenna stuck… again. Missed scans: 060-0252 to 060-0258 (vk)
  • 03:00 UT - Antenna stuck. Called JMc who suggested calling Yg. Called Yg. No answer. Continued to “Reboot Central” in HMI. Missed scans: 060-0300 to 060-0312 (vK)
  • Expected disk_pos deficit = 83 GB
  • 05:00 UT - disk_pos drifting since ~03:30 UT. Deficit is now ~55 GB, even considering the deficit from stoppages (vk)
  • 05:56 UT - Antenna stuck. Missed scans: 060-0556 to 060-0603a (vk)
  • Expected disk_pos deficit = 83 + 20
  • Spoke to John on the phone who informed me that there has been a power outage at Yg for the last ~3 hours and telescope has been operating on generators. Expecting mains power from ~07:30 UT
  • 07:03 antenna lost connection (due to generator issue?), 07:05 restarted, scans afefcted 0705-0709
  • Experimented ended 1400 GB behind?? But I ran through the list of scans one by one and couldn't find any missing after 07:07 UT (Ellen)
2015/02/28 21:48 · 0 Comments
a1514

Hobart 12m

Module HOB+0110/16000, 0 GB used, Bank A

  • It appears a large pointer jumped occurred after the first scan; mk5 thinks the first scan is 9419 GB big. (Chris)In fact, mk5hb just jump-swapped the banks – it started to append data to the module HOB+0100/16000 that contains a1512, a1213, r4676 and its last pointer position was indeed at 9419GB (Liza, on 01.03.2015)
  • 08:50 UT : disc pos ~ 50 GB behind, Rxmon restarted. (Ellen)
  • 11:25 UT : disc pos still falling behind (~60 GB). (Ellen)

Katherine 12M

Module HOB+0106/16000, 3252 GB used, Bank B

Yarragadee

Module HOB+0102/16000, 8236 GB used, Bank A

  • Ongoing DBBC issue causing problems in S band. (Dave)
2015/02/27 18:39 · 0 Comments
R4676

Hobart 12m

Module HOB+0100/16000, 7339GB

  • 18:00UT Started OK (Liza)
  • 02:30UT channels 14 and 15 show unusual values in autocorrelation(jakob&lucia)

Katherine 12M

Module USN-0035/2000, 0TB

  • 18:00UT started OK, but several scans went to the previous 16TB module containing a1513ke (Liza)
  • 23:59 UT - disk_pos 20 GB short (jakob&lucia)
  • 23:59 UT - Tsys in S-Band about 150 (jakob&lucia)
  • 06:37 UT - “WARNING: error st -27 computer acu time difference exceeded 0.25 seconds, see value above.” For the last ~1 minute. Wiki says can be safely ignored (vk)
  • 09:43 UT - “Antenna communication software (antcn) problem.” Fixed with antenna=open as suggested in log monitor. Missed scan: 058-0947a

Yarragadee

Module USN-0105/4000, 0TB

  • 18:00UT Started OK (Liza)
  • 00:23UT Tsys in IF C way too high (known problem with the DBBC) (jakob&lucia)
2015/02/26 19:07 · 0 Comments
A1513

Hobart 12m:

Disk VSN: HOB+0100/16000

Data volume at beginning: 3184 GB

  • 17:30 UT - Experiment started OK (Ross)
  • 06:00 UT - disk_pos 40 GB short (vk)
  • 08:23 UT - disk_pos 55 GB short (vk)
  • 10:20 UT - disk_pos stabilized at around 58 GB short for this check (vk)
  • 11:52 UT - disk_pos 64 GB short (vk)

Katherine 12m:

Disk VSN: HOB+0124/32000

Data volume at beginning: 20194 GB

  • 17:30 UT - Experiment started OK (Ross)
  • 23:30 UT - Changed banks from 332TB to 16TB module; now recording to HOB+0106 (the module is clean, so the disk pos on the module will change). (Imogen)
  • 08:24 UT - disk_pos 12 GB short (vk)
  • 10:17 UT - disk_pos 21 GB short (vk)

Yarragadee 12m:

Disk VSN: HOB+0102/32000

Data volume at beginning: 4674 GB

  • 17:30 UT - Experiment started OK (Ross)
2015/02/25 17:31 · 0 Comments
A1512

schedules downloaded and automatic loading of A1513 appended (Lucia)

Ops2 quite slow

Hb

module HOB+1011; starting position: 14584.546 GB

  • disk record failure when recording first scan. I swapped banks to other module. First recorded scan at 17:40. (scan 055-1739). DISK change will be necessary (Lucia)

Changed module to HOB+0100 (16TB) (Imogen)

Had to stop and restart schedule several times to ensure mk5hb was working correctly. No scans lost however, as recording on flexbuf did not stop. (Imogen)

Ke

module HOB+0124 (different from spreadsheet); starting position: 16085.055 GB

Yg

module HOB+0102 (different from spreadsheet); starting position: 1104.741 GB

  • DBBC restarted after R1 experiment has finished (power-cycle). Tsys look better now (Lucia)

Ht

  • cannot connect to ERC server. Wrote email to John. (Lucia)
  • 18:43 UT - Jon restarted the ERC server and we are monitoring now. (Lucia)
2015/02/24 14:34 · 0 Comments
R1676

Hobart 12m:

Disk VSN: HOB+1011/16000

Data volume at beginning: 12874 GB

  • 17:00UT - Experiment started OK (Liza)
  • general - strong RFI in last two channels (Lucia)

Katherine 12m:

Disk VSN: USN-0179/2000

Data volume at beginning: 0 GB

  • MONICA didn't start to export test data (Liza)
  • 17:00UT - experiment started OK (Liza)
  • Last two channels are not being not used. (Dave)

Yarragadee 12m:

Disk VSN: UVLBI-13/2000

Data volume at beginning: 0 GB

  • 16:50UT - Pointing didn't converge in 3 different attempts (virgoa, eso212, 0857m43) (Liza)
  • 17:01UT - experiment started 1 min late (Liza)
  • 13:50UT - Tsys in band 5-8 high. Could be due to known DBBC problem. Keep watching that. (Lucia)
2015/02/23 16:24 · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan