User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R1963

Hobart 26m

Disk VSN: HOB+1012 | Data volume at beginning: 10.6 TB

  • 1700UT Experiment started okay (Lim)
2020/09/08 08:18 · Lim Chin Chuan
crf120

Yarragadee 12

HOB+0098

Experiment started OK.

2020/09/07 14:28 · Earl Lester · 0 Comments
R4962

Yarragadee 12m

Disk VSN: BKG-0041 | Data volume at beginning: 261 GB

  • 1830UT Experiment started okay (Lim).
2020/09/03 07:17 · Lim Chin Chuan
r1962

Hobart 26m

Disk VSN:HOB+0103/16000/1024 | Data volume at beginning: 0 GB

  • 1700UT Experiment started okay (Prad).
2020/08/31 16:11 · Pradyumna Kiran Kummamuru
si0244yg

Hobart 12m

  • 1530UT - Experiment started ok (Prad)

Yaragadee 12m

Disk VSN: BKG-0041

  • 1530UT - Experiment started ok (Prad)
  • 1535UT - Did an fmset sync
2020/08/31 15:31 · Pradyumna Kiran Kummamuru · 0 Comments
r4961

Yarragadee 12m

Disk VSN:BKG-0041 | Data volume at beginning: 0 GB

       TR-00026 | Data volume at beginning 0 GB (207 GB recorded to BKG-0041)
  • 1830UT Experiment started okay (PRAD).
  • 2226 - Schedule halted to swap module after errors detected - bad disks? (JMc)
  • 2229 = Schedule resumed using TR-00026, no scans missed (JMc)
2020/08/27 14:22 · Pradyumna Kiran Kummamuru · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan