Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
Hb
Ke
Yg
Hobart 12m:
Disk VSN: HOB+1008
Data volume at beginning: 5587 GB
Katherine 12m:
Disk VSN: HOB+0114
Data volume at beginning: 6004 GB
Yarragadee 12m:
Disk VSN: HOB+0095
Data volume at beginniSucessfulng: 5716 GB
Hobart 12m:
Disk VSN: HOB+1008
Data volume at beginning: 0 GB
Katherine 12m:
Disk VSN: HOB+0114
Data volume at beginning: 0 GB
The Field System computer (and KVM switch) were not operating properly during setup. I had to have Martin attend the telescope to restart the KVM switch and the Field System. The first few scans were missed (as described below) (Imogen (on call)).
Yarragadee 12m:
Disk VSN: HOB+0095
Data volume at beginning: 0 GB
I can't get the text editor 'gedit' to work (I had the same issue last night), so the .sum files are in emacs. But now gnuplot doesn't have a terminal type 'wxt' (when it opens, it sets it to 'unknown'). So I had to plot the delay differences on ops4 where the command 'set term wxt 0 ; plot “ke_ddif.txt” works fine, while on ops2 I get the error: unknown or ambiguous terminal type. Has there been a software update that messed with everything? (Ellen)
Hb
Ke
NRAO-143 @ 0 GB
Yg
HOB+0022 @ 923 GB
ops2 keeps freezing and is just generally slow, I could not even open gedit for the summary files (had to load them on ops4) (Ellen)
Hobart 12m:
Disk VSN: HAY-0047
Data volume at beginning: O GB
Katherine 12m:
Disk VSN: HOB+0041
Data volume at beginning: 0 GB
Yarragadee 12m:
Disk VSN: HOB+0022
Data volume at beginning: 0 GB
Hobart 12m:
Disk VSN: HART+104
Data volume at beginning: 0 GB
Katherine 12m:
Disk VSN: HOB+0072
Data volume at beginning: 0 GB
Yarragadee 12m:
Disk VSN: HOB+0059
Data volume at beginning: 0 GB