User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


si0209

Hobart 12m

Disk VSN: fexbuffhb | Data volume at beginning: 0GB

  • 1300UT dbbcho lagged dbbc3hb recording stamp time by 1 second (warren)

Yarragadee 12m

Disk VSN: BKG-0047 ???? | Data volume at beginning: 0 GB

  • 1300UT Experiment started okay (Jay).
2020/07/28 23:48 · Warren Hankey · 0 Comments
OHG126

Hobart 26m

Disk VSN: SAO+0002 | Data volume at beginning: 6786.2 GB

  • Unable to get S/X receiver on axis. Warren had to go to Mt. P and fix it.
  • 18:30UT focus platform x-motor controller in drive room needed a reset (Warren)
  • 18:45UT - Experiment started. First good scan: 210-1852. (Patrick)
  • 05:00UT halted schedule for Brett to check receiver cabin noise interrupted scan 211-0458 (Warren)
  • 05:07 not on source for scan recording 211-0507 (caught last 40 seconds) (w)
  • 05:13 back on source for 211-0513 (w)
  • 1015UT,1020UT,1149UT, 1208UT - device rx timed out

Yarragadee 12m

Disk VSN: NRAO-177 | Data volume at beginning: 0.0 GB

  • 1730UT - Experiment started okay (Patrick)
2020/07/28 18:17 · Patrick Yates
R1957

Yarragadee 12m

Disk VSN: BKG-0047/2000| Data volume at beginning: 266.67 GB

  • 1700UT Experiment started okay (Jay).
  • 1728UT added autocorrelation spectra. scan missed- 209-1728a (Jay).
2020/07/27 16:36 · Jayender Kumar · 0 Comments
r4956

Yarragadee 12m

Disk VSN: WSRT-041/2000| Data volume at beginning: 0 GB

  • 1830UT Experiment started okay (katie).
2020/07/23 18:40 · Katie Vandorou · 0 Comments
AOV049

Hobart 26m

Disk VSN: HOB+0100/16000 | Data volume at beginning: 8976 GB

1800UT - Experiment started OK (mas). Several times error device rx-timed out (mas).

Yarragadee 12m

Disk VSN: HOB+0111/16000 | Data volume at beginning: 10044 GB

1800UT - Experiment started OK (mas)

2020/07/22 22:46 · Noor Md Said
CRD107

Hobart 26m

Disk VSN: HOB+0100/16000 | Data volume at beginning: 1077.69 GB

  • 1730UT - Experiment will start late. Antenna wind-stowed (Jay)
  • 1932UT - Antenna released from wind stow. When I put it on schedule, found out that drives had crashed. tried 15-20 times to restart drives from vdesk. finally drives restarted. Antenna put on schedule. First good scan is 203-1932. All previous scans are missed (Jay).
  • Note: large disk_pos value for HO26 is beacuse i've halted the schedule and put recording on 'off' during wind stow (Jay).
  • 12:55 UT pcfshb shutdown so clkoff maserdelay don't work on hobart fs (warren)
  • 22:50 UT no autocorrelations as no checkmk5 procedure. added procedure. autocorr look bad (w)
  • 22:56 UT terminated fs to re-establish delay comms. at same time reconfigure dbbc as spectra bad (warren)
  • 23:01 antenna comm problems, reboot drive pc (w)
  • 23:16 first source since fix 203-2316 (w)
  • 23:21 autocorrelations still bad… (w)
  • 23:40 dbbc reboot and reconfigure, still bad. (w)
  • 00:00 UT complete start from beginning, drudg schedule and proc, restart everything (w)
  • 00:22 UT back on schedule, OK now using 2-bit autocorrelation check (w)
  • 0940UT,1050UT - device rx timed out (Prad)

Yarragadee 12m

Disk VSN: HOB+0111/16000 | Data volume at beginning: 1.4 GB

  • 1730UT - Experiment started OK (Jay)
2020/07/21 17:34 · Jayender Kumar · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan