User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R1956

Hobart 26m

Disk VSN: HOB+1012 | Data volume at beginning: 9708.8 GB

  • 1700UT - Experiment started OK (Patrick)
  • 1255UT - Field system froze. rebooted Hobart pc. restarted mk5hb. reset drives. back on schedule from 1347UT. Scans affected- 203-1302 to 203-1342. (Jay)

Yarragadee 12m

Disk VSN: | Data volume at beginning: 256.9 GB

  • 1700UT - Experiment started OK (Patrick)
2020/07/20 23:01 · Patrick Yates
R4955

Yarragadee 12m

Disk VSN: | Data volume at beginning:

2020/07/17 08:33 · Lim Chin Chuan
ks2005

Hobart 26m

Disk VSN: | Data volume at beginning:

0900UT Halt schedule due to the large difference between clkoff and maserdelay (Lim) 0942UT Schedule resumed, the large offset is not a problem for the current setup (Lim)

2020/07/17 08:32 · Lim Chin Chuan
AUA066

Hobart 26m

Disk VSN: MAT+0008/8000 | Data volume at beginning: 4149.866 GB.

  • 1930UT- Experiment started late as drive was not switching on. Jamie fixed this (Prad).

Katherine 12m

*1830UT - Experiment started late.

Hobart 12m

*Had an issue with the recording after starting schedule late (1830UT). Some data of si0197 recorded at 1900UT.

Yarragadee 12m

  • Experiment started recording at 1920UT.

Data from all stations lagging by around 110GB.

2020/07/15 17:38 · Pradyumna Kiran Kummamuru
T2140

Yaragadee 12m

Disk VSN: BKG-0067 | Data volume at beginning: 0 GB.

  • Experiment started late, problem with drive. TR-00026 swapped out for BKG-0067. First good scan 196-1816 (Eloise)
2020/07/14 18:12 · Wilson-Mayne · 0 Comments
R1955

Hobart 26m

Disk VSN: MAT 0008/8000/1024 | Data volume at beginning: 0 GB.

  • Experiment started late. Problem with the drive. Warren needs to restart the drive manually. The first scan started at 1838 UT. Missed scans from 195-1700a through 195-1825. The live page is not updated (mas).
  • Received continuous error ma -4 device rx timed-out not response. At 21:53 UT terminate the PCFS and halt schedule. Received error “Allocating memory for antenna monitoring”. Couldn't connect to vdesk even after rebooting the sys26m. Missed scans from 195-2151 through …. (mas)
  • Brett used 'source=disable' to reestablish communications & schedule resumed ~2315. (JMc)
  • 0157 - Source not reached. Encoder glitch? (JMc)
2020/07/13 18:55 · Noor Md Said
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan