User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


AOV048

Yarragadee 12m

VSN: GSFC+012/8000/1024 | Data volume at beginning: 0GB

  • 1730 UT Experiment Started OK (Eloise)

Hobart 26m

VSN: HOB+0106/16000 | Data volume at beginning: 0GB

  • Experiment started late - first scan at 17:49 (Eloise)
  • 22:58 UT fs crash next good scan was 168-2328 (Warren)
  • 04:38 UT drives switched off, encoder glitch during scan 169-0438a (w)
  • 04:42 UT back on source for scan 169-0442b (w)
  • 11:35 UT fs crash. Affected scans: 169-1137 to 169-1259 (Simin)
2020/06/16 17:16 · Wilson-Mayne
R1951

Yarragadee 12m

VSN: BKG-0026/1480 | Data volume at beginning: 0.288GB

  • 1700 UT Experiment Started OK (Jay)
  • 0000 UT added checkmk5 procedure (Warren)
2020/06/15 09:16 · Jayender Kumar · 0 Comments
R4950

Yarragadee 12m

VSN: UAO-0016/2000 | Data volume at beginning: 0.0GB

  • 1830UT Experiment Started OK (Prad)
2020/06/10 18:29 · Pradyumna Kiran Kummamuru · 0 Comments
AUA065

Hobart 26m:

VSN: HOB+0106/16000 | Data volume at beginning: 0.0GB

  • Experiment started late (1801 UT). Problem with drives. Missed scans 161-1730 through 161-1758 (mas)
  • Missed scans 1917 and 1919 due to SAR track (Tiege)
  • 22:39 UT drives shut down twice, missed scans 161-2242 and 161-2246 (warren)
  • 22:50 UT resumed with 161-2250 (w)
  • ~01:50 UT - Schedule halted to fix DBBC3 delay problem. (JMc)
  • 01:59 UT - Good data after this point (JMc)

Yarragadee 12m:

VSN: HOB+10000 | Data volume at beginning: 0.0GB

  • Experiment started OK (1730 UT) (mas)
  • The si0161 schedule run between 1830 and 1930 UT

Hobart 12m:

  • Experiment started OK (1730 UT) (mas)
  • Missed scans 1917 and 1919 due to SAR track (Tiege)
  • The si0161 schedule run between 1830 and 1930 UT

Katherine 12m:

  • Experiment started OK (1730 UT) (mas)
  • Missed scan 2050 (Tiege)
2020/06/09 18:36 · Noor Md Said
R1950

Yarragadee 12m

VSN: NRAO-180/2400/1024 | Data volume at beginning: 0.0GB

Experiment Started OK (Eloise)

2020/06/08 17:05 · Wilson-Mayne · 0 Comments
r4949

Yarragadee 12m

VSN: NRCAN-05/2000/1024

Experiment Started Late (by a few minutes) At Scan 156-1840

2020/06/04 18:36 · Earl Lester · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan