User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


RD2004

Experiment Started OK! (Earl)

  • 05:15 UT - Windstow (JMc)
  • 05:40 UT - Schedule resumed (Katie)
  • 12:41 UT - field system and drive pc crashed. After restart, getting antcn#Error: Cannot get monitor info from antenna (8020002) errors (Katie)
  • 13:23 UT - back on schedule for scan 128-1324. Had to restart hobart as well. (Patrick)
2020/05/06 22:58 · Earl Lester · 0 Comments
CRD106

Yarragadee 12m

Disk VSN: HOB+0112 | Data volume at beginning: 0.0 GB

  • 1730 UT First scan missed, otherwise started ok (Eloise)

Hobart 26m

Disk VSN: HOB+0093 | Data volume at beginning: 0.0 GB

  • 1730 UT First scan missed, otherwise started ok (Eloise)
  • Ho26 Live page is dead since 1/5/2020! Warren fixed it (Simin).
  • 00:21 UT mk5 lost communication for a few minutes. Affected scans: 127-0015 and 127-0023 (Simin).
  • 06:00 UT lost connection. Affected scans: 127-0603 to 127-0629 (Simin).
2020/05/05 11:24 · Wilson-Mayne · 0 Comments
R4944

Yarragadee 12m

Disk VSN: NRAO-145 | Data volume at beginning: 0.0 GB

  • 1830 UT Experiment started OK (Lim)
2020/04/29 17:58 · Lim Chin Chuan
AOV046

Hobart 26m

Disk VSN: MAT+0004 | Data volume at beginning: 0 GB

  • 1730 UT Experiment started ok (Eloise)
  • 0130 UT wind stowed (warren)
  • 0345 UT wind stow released. not on source for scans 120-0130a to 120-0344 (w)
  • 0354 UT first scan post stow 120-0354 (w)
  • 04:52 UT weather still windy, 50% overcast (w)
  • 1301 UT A few “ERROR ma -4 Device rx timed-out on response” happened between 1301 and 1303 UT (Lim)
  • 1439 UT fs not responding. Last recorded scan 120-1431 (Lim)

Yarragadee 12m

Disk VSN: HOB+0090 | Data volume at beginning: 0 GB

*1730 UT Experiment started ok (Eloise)

2020/04/28 06:16 · Wilson-Mayne · 0 Comments
R1944

Yarragadee 12m

Disk VSN: JOD-0024 | Data volume at beginning: 0.16 GB

  • Added checkmk5 procedure to proc file.
  • 1700UT- Experiment started OK (Patrick)
2020/04/27 12:21 · Patrick Yates · 0 Comments
r4943

Yarragadee 12m

Disk VSN: MED-0040| Data volume at beginning:0 GB

  • 1830UT- experiment started Ok (Becca)
2020/04/23 00:13 · Rebecca Latto · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan