User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R4880

Kathernine 12m

Disk VSN: BKG-0037 | Data volume at beginning: 0.00 GB

  • 07:30UT - No information on IF attenuators showing up in Ke system monitor. Received 'No Monica data available' in messages. Started the Monica IFBox service by running /etc/init.d/Monica.IFBox start on pcfske.
  • Experiment started okay (Patrick).

Yarragadee 12m

Disk VSN: TR-00026 | Data volume at beginning: 0.00 GB

  • Experiment started okay (Patrick).
  • Wind stow 09:22:15 activated (Lucas).
    • Missed scan 039-0924
2019/02/07 07:36 · Patrick Yates
RD1902

Hobart 26m

Disk VSN: HOB+0097/16000/1024 | Data volume at beginning: 0 GB

  • 1800 UT - Experiment started OK (Jay).
  • 0430(038)UT - Wind stowed missed scans 038-0436 through 038-0508 (warren)
  • 0513 UT -back on source for 038-0513 (w)
2019/02/06 17:48 · Jayender Kumar · 0 Comments
OHG117

Kathernine 12m

Disk VSN: HAY-0050/5999.977 | Data volume at beginning: 0 GB

* 1730UT - Experiment started OK (Prad).

Yarragadee 12m

Disk VSN: JOD-0019 | Data volume at beginning: 0 GB

* 1730UT - Experiment started OK (Prad).

Hobart 26m

Disk VSN: HAY-0021/960/1024 for start | Data volume at beginning: 0.096 GB

* 1730UT - Experiment started OK (Prad). * 1132UT - ALARM: SX receiver parameter pres out of range for the last 2 readings. Have to call Warren to reduce the pressure. (Simin)

2019/02/05 16:52 · Lim Chin Chuan
R1880

Katherine 12m

Disk VSN: MED-0026 | Data volume at beginning: 0.673 GB

  • 1700UT - Experiment started OK (Tiege)
  • 0224UT - Missed scan 036-0224b (Brett at Katherine took over the antenna) (mas)
  • 0656UT - Error: Antenna communication software problem. Fixed with antenna=open. End of can 036-0656b possibly affected.(Katie)

Yarragadee 12m

Disk VSN: CURT+102 | Data volume at beginning: 0.897 GB

Something strange happening with Yg auto-correlation spectrum on the web page. They look fine on pcfsyg, however, the spectrum on the web page looks horrible (like when dbbc/mk5 has issues). I am assuming it is some graph scaling issue with the uploaded file?

  • 1700UT - Experiment started OK (Tiege)
2019/02/04 15:03 · Lim Chin Chuan · 0 Comments
R4879

Yarragadee 12m

Disk VSN: NRCAN-05 | Data volume at beginning: 0.00 GB

  • 1830UT Experiment started okay (Lim).
2019/01/31 19:32 · Lim Chin Chuan
T2130

Kathernine 12m

Disk VSN: BKG-0015/1480 | Data volume at beginning: 0.160 GB

  • 1730UT - Experiment started OK (Tiege)
  • 09:45UT - Network connection to Ke lost
  • 09:51UT - Network connection to Ke restored
  • 11:04UT - Lost connection to antenna during scan 030-1104. Not sure how much of this scan (if any) is usable. The mk5 was recording most of the time. Would instantly disconnect after typing antenna=open.
  • 11:29UT - Observing resumed with scan 030-1125, but started late.
  • 12:56UT - Antenna communication error. Rebooted system (timeke). Schedule halted from 12:47 UT - 12:52 UT. (Atifur)

Yarragadee 12m

Disk VSN: JOD-0019 | Data volume at beginning: 0.128 GB

  • 1730UT - Experiment started OK (Tiege)

Hobart 26m

Disk VSN: USN-0095/4000 for start | Data volume at beginning: 3698.366 GB

  • 1730UT - Experiment started OK, however, recording has been started on USN-0095 temporarily until warren can change the module out in the morning (Tiege).
  • 1900UT - Noticed S/X reciever has warmed significantly, should have noticed this earlier, should only affect the first 4ish hours of data (Tiege)
  • 21:00 - cooled S/X (warren)
  • 05:30 halted t2130 and shutdown mk5hb Streamstor fan noisy, which has killed mk5's before
2019/01/29 16:42 · Tiege McCarthy · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan