User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


R4873

Katherine 12m

Disk VSN: MED-0032/3200 | Data volume at beginning: 0.00 GB

  • 1830UT Experiment started okay (Lucas).

Yarragadee 12m

Disk VSN: JOD-0041/3200 | Data volume at beginning: 0.00 GB

  • 1830UT Experiment started okay (Lucas).
  • 1423UT Unable to connect to maser vnc (Lim).
2018/12/20 22:23 · Lucas Hyland · 0 Comments
R1873

Katherine 12m

Disk VSN : NYAL-019/2000. Data volume at the beginning 0 GB

  • The connection to the mk5 seems to be off and it seems unresponsive in general. The fmset does not return any of the three clock times; it just shows an error message. The autocorrelations are also off the charts, a problem which seemed to have arisen in the earlier experiment itself. Warren said that he would coordinate with the person at Ke in the morning and try sorting it out (Prad).

Yarragadee 12m

Disk VSN : A MPI-0419/3200. Data volume at the beginning 0.481 GB

  • 1758 UT: Experiment started late. First scan was 351-1810 (Prad).
2018/12/17 18:23 · Pradyumna Kiran Kummamuru
R4872

Katherine 12m

Disk VSN : OSOD-114/2000/1024. Data volume at the beginning 2.0 GB

  • 1830 UT: Experiment started OK (Lim).
  • 2011 UT: Created and monitor logfile under ops1hb:/home/observer/home/observer/
  • 20:30 UT haven't had sensible system temperature readings all experiment(warren)
  • 00:53 UT tried dbbc reconfigure still no system temperature (warren)
  • 01:07 UT still no good , try full dbbc restart (warren)
  • 02:30 UT tried restarting Agilent USB hub that runs power sensor, still no tsys (warren)

Yarragadee 12m

Disk VSN : BKG-0039/2000/1024. Data volume at the beginning 2.0 GB

  • 1830 UT: Experiment started OK (Lim).
  • 2024 UT: Created and monitor logfile under ops1hb:/home/observer/home/observer/
2018/12/13 18:45 · Lim Chin Chuan
RD1810

Hobart 26m

Disk VSN : USN-0102/6000/1024. Data volume at the beginning 0 GB

  • 1800 UT: Experiment started OK (Jay).
  • The clkoff and maserdelay commands not always return a value. Informed to Warren who's having a look at it (Prad).
  • 0607 UT: clkoff, maserdelay fixed. Fixed by typing the commands in hb12 fs and the commands in newsmerd became responsive again. (Atifur)
  • 1200 UT: Connection at AuScope room lost, resume observation at Mt Pleasant. Log file to be monitored is unable to be created.
  • 1351 UT: monit3 not returning value, Tsys in SysMon is referred instead. (Lim)
2018/12/12 23:30 · Tiege McCarthy
AOV030

Hobart 26m

Disk VSN : PKS+0011/8000. Data volume at the beginning 4103.707 GB

  1. 1730 UT: Experiment started OK (mas)

Katherine 12m

Disk VSN: HOB+0067/8000. Data volume at the beginning 0.0 GB.

  1. 1730 UT: Experiment started OK (mas).
  2. Couldn't get value for maserdelay and clkoff. Fmset is OK (mas)

Yarragadee 12m

Disk VSN: HART+104/8000. Data volume at the beginning 0.0 GB.

  1. 1730 UT: Experiment started OK (mas).
2018/12/11 18:06 · Tiege McCarthy
R1872

Katherine 12m

Disk VSN: USN-0095/4000. Data volume at the beginning 0.769 GB.

  • 1700 UT - Experiment started OK (Prad).
  • 0840 UT - Noticed system temperatures had not being recorded since setup so restarted dbbc. First usable scan is 345-0850b (Ross).
  • At 13:16 UT - received error antenna communication software (antcn) problem. Halt the schedule. Received continuous Alarm: error f1 -1 previous source in this schedule not reached before new source was commanded. Reboot the antenna system . Missed scans 345-1320 till 345-1354 (mas)

Yarragadee 12m

Disk VSN: USN-0150/4000. Data volume at the beginning 3.654 GB.

  • 1700 UT - Experiment started OK (Prad).
2018/12/10 16:55 · Tiege McCarthy
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan