User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


RD2101

Hobart 26m

Disk VSN: HOB+1011/16000/1024 | Data volume at beginning: 5406.39 GB

  • 1800UT Experiment started okay (Lim).
2021/01/13 17:37 · Lim Chin Chuan
T2P144

Hobart 26m

Disk VSN: HOB+1011/16000/1024 | Data volume at beginning: 2264 GB

  • Experiment started 5 minutes (1735 UT) late due to ops8 schedules script not writing snp file in hobart:/usr2/sched/ (mas/warren)
  • 2233 UT drives shut down while slewing. Missed first third of scan t2p144_ho_012-2236 as still slewing, acquired 2238, scan ends 2242 (Warren)

Yarragadee 12m

Disk VSN: HOB+1000 | Data volume at beginning: 0.0 GB

  • Experiment started OK (mas)
2021/01/12 19:07 · Noor Md Said
R1981

Hobart 26m

Disk VSN: HOB+1011/16000/1024 | Data volume at beginning: 0 GB

  • Error when setting up: SX receiver parameter pres out of range. This indicates that the pressure was too high (~6, should be less that 5. Not a big deal). Alarm ignored as there is nothing we can do about it. (Eloise & Warren)
  • 1700UT Experiment started ok (Eloise)
2021/01/11 12:15 · Wilson-Mayne
r4980

Yarragadee 12m

Disk VSN: OSOD-031/1024 | Data volume at beginning: 0 GB

1830UT Experiment started OK (Pradyumna).

2021/01/07 18:36 · Pradyumna Kiran Kummamuru
R1980

Yarragadee 12m

Disk VSN: MPI-0419 | Data volume at beginning: 0 GB

1700UT Experiment started OK (Mas).

2021/01/04 19:37 · Noor Md Said
r1978

Yarragadee 12m

Disk VSN: UVLBI-07 | Data volume at beginning: 0 GB

  • 1700UT Experiment started okay (Katie).
2020/12/21 21:30 · Katie Vandorou · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan