User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Handover notes
Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
**Template for Handover notes:**
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
AOV020
Hobart 26m
Disk VSN: HOB+0122/32000 | Data volume at beginning: 5486 GB
no VSN on tstDIMino and file webcam not working!! I made a test recording, the disk_pos incremented and checkmk5 looks fine. Assuming that disk is fine. (JS)
Start Disk VSN OSOD-031 recorded 125 GB means data volume on HOB+0122 is (current_pos)-125-5486 (Warren)
- 1730UT Experiment started OK (JS)
- 23:27 UT Changed disk to HOB+0122 (Warren)
Katherine 12m
Disk VSN: HART-032 | Data volume at beginning: 0.00 GB
- 1730UT Experiment started OK (JS)
Yarragadee 12m
Disk VSN: HAY-0021 | Data volume at beginning: 0.00 GB
- 1730UT Experiment started OK (JS)
r1831
Katherine
Disk VSN: NRAO-145/2000/1024 | Data volume at beginning: 1.026 GB
*1700UT: Experiment initiated ok (Atifur)
Yarragadee
Disk VSN: SHAO-024/2000/102Y | Data volume at beginning: 1.635 GB
*1700UT Experiment initiated ok (Atifur)
r4830
Katherine 12m
Disk VSN: USN-0042 | Data volume at beginning: 0.256 GB
- 1808UT Module does not have a VSN assigned, too dark to check physical label. Size matches.
- 1830UT Exp started OK (Patrick)
Yarragadee 12m
Disk VSN: BKG+0136 | Data volume at beginning: 0.256 GB
- 1830UT Exp started OK (Patrick)
aua037
Katherine 12m
Disk VSN: HOB+0104 | Data volume at beginning: 0.00 GB
- 1800UT Exp started OK (Arwin).
Yarragadee 12m
Disk VSN: HART-015/1480 | Data volume at beginning: 0.00 GB
- 1800UT Exp started OK (Arwin).
CRF105
Hobart 26m
Disk VSN: NYAL-013 | Data volume at beginning: 47.0 GB
- 1730 UT Experiment started okay (Lucas)
Katherine 12m
Disk VSN: OSOD-031/1300| Data volume at beginning: 0.00 GB
- Disk does not have electronic tag and webcam can't see in the dark. Using empty module on mk5 and hoping that is it correct one (Lucas).
- 1730 UT Experiment started okay (Lucas)
- Turns out it was the correct disk after all (when sun rose; Lucas).
- Need to mention what scans were missed due to SAR tracks (Arwin)
Yarragadee 12m
Disk VSN: HART-015/1480 | Data volume at beginning: 0.00 GB
- 1730 UT Experiment started okay (Lucas)
- Need to mention what scans were missed due to SAR tracks
r1830
Katherine 12m
Disk VSN:MET-0006 | Data volume at beginning: 0 GB
- 1630UT Experiment started OK (Katie)
- 1700UT Had error saying:
- Warning: No PCFS activity for xx minutes.
- Check VNC session to see if Field System software is running
- Check Network connection.
- I reset the watchdog time, and error went away. The log monitor however doesn't seem to know what it is scanning or recording etc. E remote control is working fine, and says that data is being recorded. VNC is also working fine.
Yarragadee 12m
Disk VSN: USN-0167 | Data volume at beginning: 0 GB
- 1630UT Experiment started OK (Katie)
- 1700UT Had error saying:
- Warning: No PCFS activity for xx minutes.
- Check VNC session to see if Field System software is running
- Check Network connection.
- Fixed itself, started recording fine.
