Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
Hobart 26m
Disk VSN: HOB+0132 | Data volume at beginning: 10563.90 GB
Katherine 12m
Disk VSN: GSFC+024 | Data volume at beginning: 3251.47 GB
Yarragadee 12m
Disk VSN: GSFC+023 | Data volume at beginning: 2075.19 GB
Hobart 26m
Module: HOB+0132, start pos ? GB
source=stow
command again, as telescope was not stowing. (Patrick)Katherine
Module: GSFC+024, start pos 0 GB
Yarragadee
Module: GSFC+023, start pos 0 GB
Hobart 26m
Module: HOB+0130/32000/1024, start pos 7462 GB
2017.343.04:08:52.59;"Windstowed between 343-04:06:36 and 343-04:08:48 2017.343.04:38:27.85;"Windstowed between 343-04:36:12 and 343-04:38:24 2017.343.04:43:11.58;"Windstowed between 343-04:39:52 and 343-04:43:08 2017.343.05:05:41.60;"Windstowed between 343-05:01:10 and 343-05:05:31 2017.343.05:13:14.28;"Windstowed between 343-05:09:47 and 343-05:13:03 2017.343.05:57:06.31;"Windstowed between 343-05:45:07 and 343-05:56:55 2017.343.06:24:18.82;"Windstowed between 343-06:01:39 and 343-06:24:08 2017.343.06:48:58.51;"Windstowed between 343-06:33:46 and 343-06:48:46 2017.343.07:06:06.31;"Windstowed between 343-06:53:02 and 343-07:05:55 2017.343.07:22:43.70;"Windstowed between 343-07:20:27 and 343-07:22:39 2017.343.20:53:49.22;"Windstowed between 343.20:53:49 and 343.22:55:55 2017.343.23:28:47.63;"Windstowed between 343-23:24:35 and 343-23:28:31
comments.py
. To auto report windstows and missed scans for c1712ho, download the log to /vlbobs/ivs/logs/
. This can be done using scp oper@hobart:/usr2/log/c1712ho.log /vlbobs/ivs/logs/
,manually remove the line 2017.343.00:07:44.23;“Schedule resumed after end of wind stow.
. Run python ask/comments/comments_hofix.py
to generate the email. Run flogit as per normal but make sure you download a fresh copy of the log. You might have to delete another line if the telescope goes into stow before the exp end but doesnt recover before the exp finishes. Temp workaround until the old anemometer is fixed. (Arwin)Katherine
Module: GSFC+012, start pos 3211 GB
Yarragadee
Module: HOB+01075, start pos 4167 GB
'comments.py
' will auto report this (Arwin).Hobart 26m
Disk VSN: HOB+0132/32000/1024 | Data volume at beginning: 7361.4 GB
Katherine 12m
Disk VSN: GSFC+012/8000 | Data volume at beginning: 0.000 GB
Yarragadee 12m
Disk VSN: | Data volume at beginning: 2117.4 GB
Hobart 26m
Disk VSN: HOB+0130 | Data volume at beginning: 5592.101 GB
Katherine 12m
Disk VSN: USN-0070 | Data volume at beginning: 0.000 GB
Yarragadee 12m
Disk VSN: HOB+0075 | Data volume at beginning: 0.000 GB
Hobart 26m
Disk VSN: HOB+0094/16000/1024 | Data volume at beginning: 8528 GB
Katherine 12m
Disk VSN: MAT+0004/8000/1024 | Data volume at beginning: 3218 GB
Yarragadee 12m
Disk VSN:USN+0225 | Data volume at beginning: 4155 GB