User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


si0342

Hobart 12m

Disk VSN: flexbuffhb

  • 1530UT Experiment started okay (Prad)

Yarragadee 12m

Disk VSN: BKG+0137/2000/1024 | Data volume at beginning: 0.0 GB

  • 1530UT Experiment started ok (Prad)
2020/12/07 15:09 · Pradyumna Kiran Kummamuru
AUA071

Hobart 26m

Disk VSN: USN-0102/6000/1024 | Data volume at beginning: 0 GB

  • 1800UT - Experiment started ok (Jay)

Yarragadee 12m

Disk VSN: OAN+0104 | Data volume at beginning: 0 GB

  • 1800UT - Experiment started ok (Jay)

Hobart 12m

Disk VSN: flexbuffhb

  • 1800UT - Experiment started ok (Jay)
  • 03:45 - Schedule halted to resynch dbbc3 - pps had drifted/jumped. (JMc)
  • 03:47 - schedule resumed (JMc)
2020/12/02 02:37 · Jayender Kumar · 0 Comments
si0335

Yarragadee 12m

Disk VSN: flexbuffyg

  • 1530UT Experiment started OK (Patrick).
2020/11/30 21:59 · Patrick Yates
r1975

Yarragadee 12m

Disk VSN: JIVE-057/2000/1024 | Data volume at beginning: 0.0 GB

  • 1700UT Experiment started ok (Patrick).
2020/11/30 16:37 · Patrick Yates
crd109

Hobart 26m

Disk VSN:HOB+0132 | Data volume at beginning: 10081 GB

  • 1730UT Experiment started okay (Pradyumna).
  • 1802 wind stowed (Pradyumna)
  • 2040UT Experiment resumed (Pradyumna)
  • Received errors“ Delay trough DBBC has changed. Monitor for stability and reset DBBC if it drifts”. Missed scans 331-0627 and 331-0642 (mas)

Yarragadee 12m

Disk VSN: HOB+0110 | Data volume at beginning: 8095.749 GB

  • 1730UT Experiment started okay (Pradyumna).
2020/11/25 14:52 · Pradyumna Kiran Kummamuru
R1974

Hobart 26m

Disk VSN: HOB+0132 | Data volume at beginning: 5401.66 GB

  • maserhb seems to be down.
  • 1700UT Experiment started ok (Patrick)
  • 0509UT Wind stow (Simin)
  • 1339UT Experiment resumed (Prad)
2020/11/24 15:45 · Patrick Yates
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan