User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


aua027

Katherine 12m:

Disk VSN: USN+0227/8000

Data volume at beginning: 0 GB

17:30:00 UT Experiment started OK (mas)

Yarragadee 12m:

Disk VSN: HOB+0076/8000/1024T

Data volume at beginning: 0 GB

17:30:00 UT Experiment started OK (mas)

2017/09/19 21:12 · Noor Md Said
R1810

Katherine 12m:

Disk VSN: USN-0137

Data Volume at Beginning: 0 GB

  • 17:00UT Experiment started OK (Tiege).

Yarragadee 12m:

Disk VSN: USN-0138

Data Volume at Beginning: 0 GB

  • 17:00UT Experiment started OK (Tiege).
2017/09/18 17:01 · Tiege McCarthy · 0 Comments
f12110

Hobart 26m:

Disk VSN: HOB+0098/16000/1024

1640 UT: Experiment started okay (mas).

Ceduna 30m:

Disk VSN: WD-WMATW0026299

1640 UT: Experiment started okay (mas).

2017/09/16 01:09 · Noor Md Said
r4809

Katherine 12m:

Disk VSN: MED-0020

Data Volume at Beginning: 0 GB

  • 18:30UT Experiment started okay (Liz).

Yarragadee 12m:

Disk VSN: SHAO-017

Data Volume at Beginning: 0 GB

  • 18:48UT Experiment started late because fs did not recognise module was in even though it was. Had to terminate and restart running fs. First scan 257-1851 (Liz)
2017/09/14 18:45 · Jonathan Rogers · 0 Comments
aua026

Hobart 26m:

Disk VSN: HOB+0098

Data Volume at Beginning: 37.50 GB

  • 18:00 Experiment started OK (Ross)
  • Maser has been synced but reports a syncerr_gt_3 which can not be corrected in fmset. Jamie says maserdelay is from different maser (Ross)
  • 23:42 Mark 5B syncerr_gt_3 error, ran fmset on hobart but not sure if it will hold. dbbc=pps_delay was jumping around a bit previously, will monitor it. (Patrick)
  • 04:17 Weather command missing from midob procedure, added in by Jamie. (Patrick)
  • 17:06 He supply pres has dropped to approx 273psi but is climbing again. A similar large drop in pressure then increase occurred between approx 1200-1500 but not so low. Now above 275psi again… (Liz)

Katherine 12m:

Disk VSN: HOB+0068

Data Volume at Beginning: 0.00 GB

  • 18:00 Experiment started OK (Ross)
  • GPIB has been removed so no clkoff or maserdelay measurements reported (Ross)
  • 23:36 Ke reporting overflowing Tsys measurements in all channels, and autocorrelation spectra looks super weird. Power cycled DBBC, reconfigured, and synched times to fix it. Resumed schedule at 00:10 with scan No0082 (Patrick)
  • 00:33 Overflowing Tsys measurements again. Restarted and reconfigured DBBC as before. Resumed at 00:47 with scan No0093. (Patrick)
  • 05:10 Tsys overflowing again, restarted and reconfigured DBBC as before. mk5 wouldn't resync, got this error when running fmset: mk5cn: time-out, connection closed. Tried restarting Mark5 (Dimino process), and reconfiguring DBBC again, but no luck. Jamie looking in to it. (Patrick)
  • 06:00 DBBC needs fixing onsite, a card may need replacing. Katherine is out of the experiment, and hopefully will be fixed tomorrow. (Patrick)
  • 07:20 Mick fixed issues with DBBC, good data again at scan no0164. (Bryn)
  • 10:00 network issue, lost connection to mk5ke. getting error: no route to host. power cycling mk5 and reformatting time with fmset. Missed scan no0189 and no0190. (Bryn)

Yarragadee 12m:

Disk VSN: GSFC+015

Data Volume at Beginning: 0.00 GB

  • 18:00 Experiment started OK (Ross)
2017/09/13 14:28 · Jonathan Rogers · 0 Comments
R1809

Katherine 12m Module: USN-0097 Start data: .384 GB

  • 1700UT First source and data achieved OK (JS)

Yaragadee 12m Module: NYAL-019 Start dat: 0. GB

  • 1700UT First source and data achieved OK (JS)
2017/09/11 14:25 · Jesse Swan · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan