User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


apsg40

Katherine 12m:

Disk VSN: HOB+1003

Data volume at beginning:2952.557 GB

  • 17:30UT: Exp started OK. (Arwin)

Yarragadee 12m:

Disk VSN:HOB+0034

Data volume at beginning: 0 GB

  • 1715UT: mk5 crashed, did a soft reboot and also rebooted the telescope drives as they were stuck. (Arwin)
  • 17:30UT: Exp started OK. (Arwin)
  • 2252UT: Auto correl spectra channel 13 has a sharp peak. Not sure if this is bad? (Arwin)
2017/07/25 17:35 · Jesse Swan
R1802

Hobart 26m

Disk VSN: GSFC+018/8000/1024

Data volume at beginning: 0. GB

  • 1815UT Experiment running smoothly with small recording deficit (-1.1GB) (JS)

Hobart 12m

Telescope in parallel dbbc mode for 26m

0429 DBBC accidentally terminated. Restarted and fmset run. Clock break in the mark5B data at this time (JMc)

Katherine 12m

ke was assigned to use module BKG+0109/4000 which I assume is in bank B. mk5 is not reporting a VSN label for this module, however, and the interior light in ke control room is not on for me to repair the vsn label. I am recording data instead to HOB+1003/8000 which is meant for APSG40 – JS

Disk VSN: HOB+1003/8000/1024

Data volume at beginning: 0. GB

  • 1815UT Experiment running smoothly with small recording deficit (-0.3 GB) (JS)

Yarragadee 12m

Disk VSN: USN-0150

Data volume at beginning: 0. GB

  • 1815UT Experiment running smoothly with small recording deficit (-1.8GB) (JS)
  • 0801UT Recording deficit at -28.5 GB (PY)
  • 1131UT Recording deficit at -35.6 GB (PY)
2017/07/24 16:10 · Jesse Swan · 0 Comments
R4801

Katherine 12m

Disk VSN: USN-0141

Data volume at beginning: 0.256 GB

  • 18:30UT Experiment started OK (Tiege)
  • 2017.202.16:03:28 ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Clock jump. Monitoring (Lucas).
  • 16:10 UT Reconfigured dbbc. Missed scan 202-1612

Yarragadee 12m

Disk VSN: JIVE-064 Data volume at beginning: 0.256 GB

  • 18:30UT Experiment started OK (Tiege)
2017/07/20 18:24 · Jamie McCallum · 0 Comments
aua023

Hobart 26m

Disk VSN: HOB+0083/8000/1024

Data volume at beginning: o GB

  • 18:00UT received several errors,error stop at 19:37UT. (mas)

warning error m5 -900: can't xlrread() , error m5 -904 mark5 return code 4: error encountered (during attempt to execute) , error sh-302 background mark5 error (s) detected , error ma-829 mk4 fm illegal sample rate , error m5 -900 : frequency out of range , error m5 -908 mark5 return code 8: parameter error , error with proc file, using the old aua022 proc file ,

  • 10:04UT diskpos lagging by 392 presumable due to above errors and and a late start? (Arwin)

Ke 12 m

Disk VSN: GSFC+023/8000

  • 18:00UT experiment started OK (mas)
  • 0333 UT - mk5cn timeout - no response from DIMino. mk5ke still ssh-able, so rebooted. DOT time badly out on reboot, corrected with '.' in fmset. No resynch. No useful data 0333-0340. (JMc)
  • 10:04UT Maser pc unreachable. (Arwin)

Yg 12 m

Disk VSN:HOB+0075/8000/1024

  • 18:00UT experiment started OK (mas)
2017/07/19 04:28 · Jesse Swan · 0 Comments
r1801

Katherine 12m

Disk VSN: HAY-0062

Data volume at beginning: 2.949 GB

  • 17:00UT Experiment started okay (Patrick)

Yarragadee 12m

Disk VSN: USN-0014 Data volume at beginning: 1559.259 GB

  • 17:00UT Experiment started okay (Patrick)
2017/07/18 14:44 · Jesse Swan · 0 Comments
rv124

Yarragadee

Disk VSN: USN-0014

Data Volume at Beginning: 0 GB.

  • 16:30 UT Experiment started OK. (Bryn)
2017/07/17 14:57 · Jesse Swan · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan