User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Handover notes
Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
**Template for Handover notes:**
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
R4800
KE
Disk: JOD-0015/2000, Initial Position: 0.000 GBs
- Experiment started okay (Lucas).
YG
Disk: MET-0001/2000, Initial Position: 0.00 GBs
- Experiment started okay (Lucas).
rd1707
Hobart 26m:
Disk VSN: IAA-0028
Data volume at beginning: 0 GB
- 18:00UT Experiment started OK. (Arwin)
- 22:18UT ALARM: SX receiver parameter pres out of range for the last 4 readings. Will notify warren/brett, though everything looks fine on the live page. (Arwin)
r1800
Katherine 12m
Disk VSN: BKG+0120
Data volume at beginning: 0 GB
* Setup: dbbc lost connection, clock jump, had to restart .exe program and reconfigure.
- 17:00UT Experiment started okay (Liz)
- 17:43 Alarm: delay through dbbc has changed…clock drift of almost 0.1 since beginning of experiment (Liz)
- 17:49 Halted schedule to reconfigure dbbc, missed scans 191-1749, 191-1751c and 191-1755. Delays stable. Not sure how good the data before this will be… (Liz)
Yarragadee 12m
Disk VSN: USN-0093
Data volume at beginning: 0 GB
- 17:00UT Experiment started okay (Liz)
R4799
Katherine 12m
Disk VSN: SHVL-012
Data volume at beginning: 9.840 GB
- 18:30UT Experiment started okay (Tiege)
Yarragadee 12m
Disk VSN: TR-00015
Data volume at beginning: 2.628 GB
- 18:30UT Experiment started okay (Tiege)
r1799
Katherine 12m
Disk VSN: HOB+0039/6000/1024
Data volume at beginning: 0.577 GB
- 17:00UT Experiment started okay (Patrick)
Yarragadee 12m
Disk VSN: WSRT-061/2000/1024
Data volume at beginning: 0.609 GB
- 17:00UT Experiment started okay (Patrick)
r4798
Katherine 12m
Disk VSN: BKG-0040
Data volume at beginning: 0 GB
- 18:30UT Experiment Started Okay (Liz)
Yarragadee 12m
Disk VSN: USN-0173
Data volume at beginning: 0 GB
- 18:30UT Drive elevation stopping operate again. Think it was something to do with sending the telescope to stow between experiments because didn't happen for straight setup yesterday but seems to happen a lot between experiments (Liz)
- 19:18UT Finally acquired source. First scan 180-1917 (Liz)
