User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


si0329

Hobart 12m

Disk VSN: flexbuffhb

  • 1530UT Experiment started okay (Patrick)

Yarragadee 12m

Disk VSN: NYAL-013/1440/1024 | Data volume at beginning: 0.0 GB

  • Module has empty vsn in field system - didn't get a chance to relabel before schedule started. Not sure if safe to relabel after experiment finished. (Patrick)
  • 1530UT Experiment started late due to module changeover, missed scan 329-1530 (Patrick).
2020/11/24 15:42 · Patrick Yates
RD2009

Hobart 26m

Disk VSN: HOB+0132 | Data volume at beginning: 5401.66 GB

  • 1630UT Experiment not started (Lim)
  • 0022UT First good data after LNA Power supply repair. Receiver warm, but cooling (JMc)
2020/11/23 16:25 · Lim Chin Chuan
AUM022

Hobart 12m

Disk VSN: flexbuffhb

  • 1630UT Experiment started okay (Lim)

Yarragadee 12m

Disk VSN: HOB+0033 | Data volume at beginning: 0.0 GB

  • 1630UT Experiment started okay (Lim).
  • 1414UT Ran out of space on module. Missed scans: 329-1414 to 329-1527. (Patrick)
2020/11/23 16:22 · Lim Chin Chuan
AOV053

Hobart 12m

Disk VSN: flexbuffhb

  • 1730UT Experiment started okay (Lim).

Yarragadee 12m

Disk VSN: HOB+0110 | Data volume at beginning: 7143.65 GB

  • 1730UT Experiment started okay (Lim).
2020/11/17 17:18 · Lim Chin Chuan
r1973

Hobart 26m

Disk VSN: HOB+0132/16000/1024 | Data volume at beginning: 4015.8 GB

  • 1700UT Experiment started OK (Patrick)
  • 2218 UT Halted to try fix x-band bad LNA voltage (warren)
  • 0300 UT resumed schedule with 322-0300a (w)
2020/11/16 15:29 · Patrick Yates
si0321

Yarragadee 12m

Disk VSN: HOB+0110/16000/1024| Data volume at beginning: 6890.7 GB

  • 1530UT - Experiment started OK (Patrick)

Hobart 12m

Disk VSN: flexbuff

  • 1530UT - Experiment started OK but wind stowed. (Patrick)
  • Wind stowed for whole experiment.
2020/11/16 15:29 · Patrick Yates · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan