User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Handover notes
Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
**Template for Handover notes:**
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
AOV015
Hobart
Module: HOB+1007, start pos 0.769 GB
- 1730 UT - Experiment started OK. (Tiege)
Katherine
Module: HOB-0069, start pos 1.795 GB
- 1730 UT - Experiment started OK. (Tiege)
Yarragadee
Module: HART+101 start pos 1.154 GB
- 1730 UT - Experiment started OK. (Tiege)
r1787
Hobart
Module: USN-0085, start pos 1573.233 GB
- 1700 UT - Experiment started OK. (Ross)
- Experiment end, change module to HOB+1007 for AOV015 (Warren)
Katherine
Module: HAY-0049, start pos 0 GB (should have been recorded to HAY-0047/6000 with mv007)
- 1700 UT - mk5 connection issue, needed to restart dimino but could not terminate. Had to reboot mk5. This did not resolve problem. Repeated a further time but the commands in the pcfs system a taking up to a minute to take effect. Used IP switches to reboot both mk5 and pcfs, however pcfs cannot be pinged. Have rebooted several times and waited at least ten minutes. mk5 can be pinged. (Ross)
- 1810 UT - pcfske successfully pinged. (Ross)
- 1815 UT - mk5 connection still refused and dimino cannot be killed on rebooted machine. (Ross)
- 1820 UT - dimino started but field system cannot be resynced due to connection issue. Also, antenna control in timeke shows write error 10054 (Ross)
- 1830 UT - Katherine withdrawn from experiment until these issues can be resolved. (Ross)
- 2330 UT - first OK scan 100-2331 delay diff = 0.39 us (Warren)
- 0108(101) UT - data 544 GB behind scheduled due to late start (Warren)
- 0151 UT - reconfigured dbbc as fmout-gps drifted slowly but steadily out to 1.4 us (warren)
- 0202 UT - first scan 101-0202a after dbbc reconf (Warren)
- 0420 UT - delay diff stable since scan 101-0202a (Warren)
- 1557 UT - 'ALARM: error m5 -104 mk5cn: time-out, connection closed' error, during scan 101-1557b, everything seems to be running fine now though.
Yarragadee
Module: HOB+0075, start pos 3182.812 GB
- 1700 UT - Experiment started OK. (Ross)
MV007
HB
Disk USN-0097/4000, start position 0.000 GBs
- Experiment started fine.
KE
Disk HAY-0047/6000, start position 0.000 GBs
- Experiment started groovy.
YG
Disk HOB+0075/8000, start position 0.000 GBs
- Experiment started mint.
CD
Disk HOB+1002/16000, start position 12972.403 GBs
- Ceduna joined experiment properly at 9.47 UT, first scan j0522-661. All previous data probably “incorrelatable/uncorrelatable”.
R4786
Hobart
Module: USN-0085, start pos 0GB
- 19:10 UT - Experiment started late due to required trip to Mt P. Key was not turned in module bank. First scan recorded 096-1918, approx 60 GB lost. (Ellen)
- 22:20 UT - All tsys values consistently quite high 120-200. Will monitor. (Ellen)
Katherine
Module: UAO-0019, start pos 0GB
- 18:30 UT - Experiment started ok. (Ellen)
Yarragadee
Module: BKG-0045, start pos 0GB
- 18:30 UT - Experiment started ok. (Ellen)
AUA019
HB
HOB+1009/16000/ start position 3069.287 GBs
- Experiment started one scan late, no problems however (Lucas).
- 03:50 UT - 50 GB behind schedule. All stations are significantly behind. (Ellen)
- 5:55UT - 53 GB behind schedule. (Ellen)
- 9:00UT - ~50GB behind (Jonny)
- 11:40UT - 52GB behind (Jonny)
- 14:08UT - 64 GB behind (Ellen)
KE
HOB+0107/16000/ start postion 1498.522 GBs
- Experiment started one scan late (Lucas).
- A scan into schedule e-remote froze and fs had frozen on pcske. Restarted (twice) and then it began working. First scan 095-1834 (Lucas).
- 3:55 UT - Disc pos ~65 GB behind. (Ellen)
- 6:00 UT - Disc pos ~65 GB behind. (Ellen)
- 09:00 UT - ~65GB behind..? (Jonny)
- 11:50 UT - ~69GB behind (Jonny)
- 14:08UT- 70GB behind. (Ellen)
- 16:19UT -
YG
HOB+0098/16000/ start position 1756.694 GBs
- Experiment started one scan late, no problems however (Lucas).
- 04:00 UT - 67 GB behind data pos. (Ellen)
- 06:00UT - 72 GB behind. (Ellen)
- 09:00UT - ~74 GB behind. (Jonny)
- 14:08UT - 97 GB behind. (Ellen)
- 16:19UT - 105 GB behind. (Ellen)
CRDS87
Hobart 26m
Module: WSRT-061/2000/1024, start position 0.000 GBs
- 17:30UT Experiment started okay (JS)
Hobart
Module: HOB+1009 (along with prev. r1), start position 1203.55 GBs
- 17:30UT Experiment started okay (JS).
Kath
Module: HOB+0107 start at 0.000 GBs
- 17:30UT Experiment started okay (JS)
Yarragadee
Module: HOB+0098 start position 0.000 GBs
* 17:30UT Experiment started okay (JS)
