User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


r4969

Yarragadee 12m

Disk VSN: HAY-0010 | Data volume at beginning: 0 GB

  • 1830UT Experiment started okay (Katie).
2020/10/22 20:27 · Katie Vandorou · 0 Comments
si0294

Hobart 12m

Disk VSN: flexbuffhb

  • 1830UT Experiment started okay (Patrick)

Yarragadee 12m

Disk VSN: CURT+101/6000

  • 1830UT Experiment started okay (Patrick)
2020/10/20 22:52 · Patrick Yates
AUA069

Hobart 26

Disk VSN: HOB+0133/16000 | Data volume at beginning: 11373.9 GB

  • 1730UT Experiment started okay (Patrick)

Hobart 12m

Disk VSN: flexbuffhb

  • 1730UT Experiment started okay (Patrick)
  • 0000UT reconfigured dbbcho as delays and power reported “bad” (warren)
  • 0010UT having run aum.setup.py script, dbbcho reports “OK” (w)

Yarragadee 12m

Disk VSN: CURT+101/6000 | Data volume at beginning: 0.0 GB

  • 1730UT Experiment started okay (Patrick)
2020/10/20 17:31 · Patrick Yates
R4968

Yarragadee 12m

Disk VSN: HOB+0047/6000 | Data volume at beginning: 0.192 GB

  • 1830 UT Experiment started ok (Jay)
  • 1840 UT Added checkmk5 command. Missed scan 289-1842 and 289-1845
2020/10/15 18:14 · Jayender Kumar · 0 Comments
AUM020

Hobart 12m

Disk VSN: flexbuffhb

  • 1800UT Experiment started okay (Lim)
  • 2207UT - Both pols of S-band now connected (Y-pol previously disconnected) (JMc)
  • 2359-0044 - Drive error - not tracking during this time. Fixed with “antenna=open; antenna=operate” (JMc)

Yarragadee 12m

Disk VSN: HOB+0094 | Data volume at beginning: 9788.65 GB

  • 1800UT Experiment started okay (Lim).
2020/10/14 18:05 · Lim Chin Chuan
r1968

Hobart 26m

Disk VSN: HOB+0116/16000 | Data volume at beginning: 8436.4 GB

  • 1700 UT Experiment started ok (Patrick)
2020/10/13 11:00 · Patrick Yates
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan