User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


si0287

Hobart 12m

Disk VSN: flexbuff

  • 1530UT - Experiment started OK (Patrick)
  • S-band Y-pol disconnected throughout.

Yarragadee 12m

Disk VSN: HOB+1010

  • 1540UT - Experiment started late, mk5yg crashed. First good scan 287-1540 (Patrick)
2020/10/13 11:00 · Patrick Yates
crf121

Hobart 26m

Disk VSN: HOB+0116/16000 | Data volume at beginning: 0 gb

  • 1000 UT Experiment started ok (Prad)
  • Receiver temperature was high. Warren turned the valve on at 1100UT. Fixed the pressure/temp.

Yarragadee 12m

Disk VSN: HOB+0094/16000| Data volume at beginning: 0GB

  • 1000UT Experiment started ok (Prad)
2020/10/12 09:58 · Pradyumna Kiran Kummamuru · 0 Comments
R4967

Yarragadee 12m

Disk VSN: BKG-0047/2000/1024| Data volume at beginning: 0GB

1830 UT Experiment started ok (mas)

2020/10/08 21:48 · Noor Md Said
AOV052

Hobart 26m

Disk VSN: CURT+102/6000 | Data volume at beginning: 0 gb

  • mk5 was not communicating with the field system. So initially, there was no recording. After restarting the mk5 and DIMino had to then restart the drivepc (antenna communication was broken).
  • 21:40 UT Experiment recording started at 21:40 UT after power cycle dbbchb (warren)
  • 14:26, 15:20: UT Received continuous error: “error being ignored: error ma -4 device rx timed-out on response” (mas)
  • 15:21 UT halt schedule. Restart PCFS. Missed scans 282-1518 and 282-1606 (mas)

Yarragadee 12m

Disk VSN: HOB+0016/8000| Data volume at beginning: 0GB

  • 1800UT Experiment started ok (Prad)
2020/10/07 13:57 · Pradyumna Kiran Kummamuru · 0 Comments
R1967

Yarragadee 12m

Disk VSN: OAN+0006/4000 | Data volume at beginning: 0.096 GB

  • 1700UT - Experiment started OK (Patrick)
2020/10/05 16:44 · Patrick Yates
si0279

Hobart 12m

Disk VSN: flexbuff

  • 1530UT - Experiment started OK (Patrick)

Yarragadee 12m

Disk VSN: flexbuff

  • 1530UT - Experiment started OK (Patrick)
2020/10/05 11:47 · Patrick Yates
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan