User Tools

Site Tools


operations:handover

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Handover notes

Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.

Notes should be placed below the horizontal line as a new blog entry.

Continuing problems should be copied to the Current Issues page.

**Template for Handover notes:**

Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.

It is ESSENTIAL to put your name after EVERY entry. Copy and paste the template into the new handover notes

====== Experiment Name ======

**Hobart 12m**

Disk VSN: abc-123 | Data volume at beginning: 2.34 GB

   * 1300UT a comment from me (user)

**Katherine 12m**

Disk VSN: | Data volume at beginning:  GB

   * 

**Yarragadee 12m**

Disk VSN: | Data volume at beginning:  GB

   * 1300UT Experiment started okay (JMc).

Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!

Time stamp in UT * Comment * (Your Name)

For Example:

20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)

20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)

Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.


OHIG98

Hobart 26m:

Disk VSN: HOB+0114 (only module available)

Data volume at beginning: 2619.224 GB

Katherine 12m:

Disk VSN: GSFC+011

Data volume at beginning: 1061.936 GB

  • 13:12 UT - Clock jump. clkoff values way too high. Missed first half of scan 322-1322 due to restarting DBBC. (Ellen)

Yarragadee 12m:

Disk VSN: USN-0102

Data volume at beginning: 1023.555 GB

2015/11/17 17:27 · Ross Turner · 0 Comments
R1714

Hb

VSN: HOB+0114

  • Hb not in original skd. Skd file wa updated, but `slogit.auscope` script did not overwrite old file. Removed old file and drudg'ed. Started 10min late — David Horsley 2015/11/16 17:33
    • missed scans 320-1700a – 320-1707

Ke

VSN: USN+0221

Yg

VSN: HOB+0100

2015/11/16 17:41 · David Horsley · 0 Comments
R4713

Hobart 26m

Module: HOB+005, start pos 0 GB

  • 18:30 UT - Experiment started ok. (Ellen)

Katherine

Module: USN-0042, start pos 0 GB

  • 18:30 UT - Experiment started ok. (Ellen)

Yarragadee

Module: UAO-0031, start pos 0 GB

  • 18:30 UT - Experiment started ok. (Ellen)
2015/11/12 18:35 · Ross Turner · 0 Comments
OHIG97

Hobart 26m:

Disk VSN: HOB+0095

Data volume at beginning: 4185.303 GB

Katherine 12m:

Disk VSN: GSFC+011

Data volume at beginning: 0.016 GB

Yarragadee 12m:

Disk VSN: USN-0102

Data volume at beginning: 0.016 GB

2015/11/11 12:56 · Lucia McCallum · 0 Comments
R1713

11:25 UT - Lost connection to all telescopes barring Ho and Hb. (Ellen)

Ke

  • Module NRAO-020, 0 GB
  • experiment did not start on time. First scan 313-2157a (Lucia)

Yg

  • Module USN-0173, 0 GB
  • experiment did not start on time. First scan 313-2157a (Lucia)
  • Scan 314-0301 had incorrect frequency settings. Some DBBC commands intended for Hb12 (under testing) were sent to Yg my mistake.
  • 07:51 UT - reported the error “ALARM: error m5 -104 mk5cn: time-out, connection closed”, which I've previously only seen for Ho 26m. As far as I can tell, again nothing is wrong. (Ellen)
  • 13:25 UT – VPN connection restored. Station looks to have operated OK in the break. (Dave)

Ho

  • experiment did not start on time. First scan 313-2156 (bad) (Lucia)
  • Receiver warm at the beginning, Brett turned the vacuum pump on. wrong receiver. First good scan 313-2258 on source 0748+126. (Lucia)
  • 1:02 UT: cnanot read receiver position correctly. But s/x is on. Receiver still warm, but on its way to get cooler. (Lucia)
2015/11/09 22:28 · Lucia McCallum · 0 Comments
R4712

Hobart 26m:

Disk VSN: HOB+0095

Data volume at beginning: 2494.34 GB

  • 00:15 UT log monitor gave error saying receiver was off axis. Halted schedule, moved receiver to L-band and back to S-X to reset. Restarted schedule at 00:28UT. (Imogen)

Katherine 12m:

Disk VSN: USN-0035

Data volume at beginning: 0.256 GB

  • 1232 UT S-band temps are high ~120-150K (JS)

Yarragadee 12m:

Disk VSN: USN-0182

Data volume at beginning: 1.314 GB

  • 0940 UT m5 -104 mk5cn error. Doesn't appear to mean anything (JS)
2015/11/05 05:10 · Jim Lovell · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/handover.txt · Last modified: 2018/10/29 16:27 by Jesse Swan