User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Handover notes
Please use this page to write up any notes on anything that needs to be passed on to the next observer or should go into the end of experiment message.
Notes should be placed below the horizontal line as a new blog entry.
Continuing problems should be copied to the Current Issues page.
**Template for Handover notes:**
Be sure to add any specific notes about the experiment if required, for example “Special back end configuration for x reason”. Put as much detail as you can - the more the better.
====== Experiment Name ====== **Hobart 12m** Disk VSN: abc-123 | Data volume at beginning: 2.34 GB * 1300UT a comment from me (user) **Katherine 12m** Disk VSN: | Data volume at beginning: GB * **Yarragadee 12m** Disk VSN: | Data volume at beginning: GB * 1300UT Experiment started okay (JMc).
Format for entering a comment It is important to stick to this formula - there is a good reason we need this information, so please include it!
Time stamp in UT * Comment * (Your Name)
For Example:
20:00UT: Wind stows, Missed scans 012-3456 to 012-3457 (Jim)
20:50UT: Mark5 lost connection, had to restart Mark5 and reconfigure DBBC, called Jamie on call to fix, missed scans 012-3456 to 012-4567 (Jim)
Again - as much detail as you can. It is important to remember that these notes will be sent to the correlator, so please make sure they make sense to others.
R1701
Hobart 26m:
Disk VSN: HOB+0034
Data volume at beginning: 1940.34 GB
Katherine 12m:
Disk VSN: USN-0114
Data volume at beginning: 0 GB
- 1640UT Pointings OK (JS)
Yarragadee 12m:
Disk VSN: USN-0097
Data volume at beginning: 0 GB
- 1640UT Pointings OK (JS)
- high Tsys in upper two s-band channels (Lucia)
R4700
Hobart 26m:
Disk VSN: HOB+0034
Data volume at beginning: 848 GB
Katherine 12m:
Disk VSN: USN-0202
Data volume at beginning: 0 GB
Yarragadee 12m:
Disk VSN: UAO-0018
Data volume at beginning: 0 GB
*
CRDS78
Hobart 26m:
Disk VSN: USN+0227
Data volume at beginning: 0 GB
Katherine 12m:
Disk VSN: USN+0226
Data volume at beginning: 0 GB
Yarragadee 12m:
Disk VSN: USN+0224
Data volume at beginning: 0 GB (-53 GB deficit)
* Scans 224-1730 through 224-1758 on module IAA-0028. Subsequent scans on USN+0224 (Ross).
R1700
Hobart 26m:
Disk VSN: HOB+0034
Data volume at beginning: ~0.4 Gb
Persistent tsys overflow errors and error device vf timed-out on response, but they are nothing to worry about according to Jamie. (Anita)
22:54:19.98?ERROR ch -350 The Receiver 20K stage is hotter than 40K. Rang Eric, he is working on it. (Anita)
Katherine 12m:
Disk VSN: HAY-0029
Data volume at beginning: ~0.1 Gb
- 09:00 UT - Persistent high tsys values in channels 09-12. (Ellen)
Yarragadee 12m:
Disk VSN: USN-0111
Data volume at beginning: ~0.1 Gb
Had “ifpcn: error response from ifpic” error a few times. After the first one restarted Monica.IFBox, but it doesn't seemed to have fixed it. disk_pos looks ok, so not too worried. (Anita)
- 09:00 UT - Persistent high tsys values in channels 09-12 (except 11). (Ellen)
VEPS05
Hobart 26m:
Disk VSN: MarkIV recording to HOB+0075 (Mark5A), DBBC recording to HOB+0076 (Mark5B+)
Data volume at beginning: 0 I think. Ellen reports data volumes lagging on Mark5A
R4699
Hobart 26m
Module: HOB+0112, start pos 0 GB
- 18:30 UT - Experiment started ok. (Ellen)
- 18:41 UT - Returning error “Last commanded IFD attenuations used as default, please modify command.”
- 18:56 UT - Called Jamie and fixed the IFD issue. (Ellen)
Katherine
Module: TR-00014, start pos 0 GB
- 18:30 UT - Experiment started ok. (Ellen)
Yarragadee
Module: BKG+0136, start pos 0 GB
- Command “wth” returns an error, saying that it's an unrecognised name… The other stations are still fine with it. (Ellen)
- 18:30 UT - Experiment started ok. (Ellen)
- 18:51 UT - Called Jamie and fixed the wth command. (Ellen)
