blog:continuous_cal

This wiki is not maintained! Do not use this when setting up AuScope experiments!

« DBBC work at Yg, 2013 Jul 25

Yg Equipment room partition 2013 August 1 »

Continuous cal at Yg

The continuous cal cabling from DBBC to noise diode was completed and tested succesfully. Jamie calculated that the S-band continuous cal signal should be decreased by 7dB and that X-band should be increased by 7dB. This has been done and needs testing. The normal cal should also be checked for amplitude.

Brett Reid

You could leave a comment if you were logged in.

/home/www/auscope/opswiki/data/pages/blog/continuous_cal.txt · Last modified: 2013/07/26 09:29 by Moblas people