This wiki is not maintained! Do not use this when setting up AuScope experiments!

DBBC configuration with new IFA/IFB firmware swap

Placed new firmware file, called dbbc2_IFA_IFB_swap.bit in C:\DBBC_CONF\FilesDBBC
In C:\DBBC_CONF, edit conf.cmd and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
In C:\DBBC_CONF, edit “geo” config files and changed dbbc2.bit references to dbbc2_IFA_IFB_swap.bit
In “geo” config files, swapped first 4 freqs with second four
re-started DBBC server, configured
dbbcifa=1,agc,4
dbbcifb=4,agc,1
dbbcifc=2,agc,2
dbbcifd=2,agc,2
dbbcifa reports 48066 0 atten
dbbcifb reports 54899 8 atten
dbbcifc reports low power (unrelated S-band problem, being investigated now)
dbbcifd reports low power (unrelated S-band problem, being investigated now)
reg=1,17,4
reg=5,17,4
reg=1,19,4
reg=5,19,4
pps_sync

You could leave a comment if you were logged in.