blog:ups_checks

This wiki is not maintained! Do not use this when setting up AuScope experiments!

« Fringe test experiment 12 May 2010 (day 132)

RF cross-over switch test »

UPS checks

A test to see if the two UPS units in rack 14 can keep the DBBC, PCFS, Mark5B, IF unit running in the event of a power failure.

Power was removed to the UPS powering the DBBC and PCFS for 2 min. No interruption to either unit was seen. Similarly, the test was run on the UPS powering the Mark5B equipment and IF unit, and was successful.

You could leave a comment if you were logged in.

/home/www/auscope/opswiki/data/pages/blog/ups_checks.txt · Last modified: 2011/10/26 06:37 (external edit)