blog:x-band_signal_path_at_yg

This wiki is not maintained! Do not use this when setting up AuScope experiments!

« Hb Cal & Efficiency estimate

Yg encoder offsets and Lower El limit »

X-band signal path at Yg

Brett and Randall have re-wired the X-band cables in the feed tube, made sure the colours correct and checked the LNAs are correctly labeled for polarisation.

Moved the X-band cross-over switch to Direct (note RFBox interface shows it to be crossed, but it's not!)

Yg

You could leave a comment if you were logged in.

/home/www/auscope/opswiki/data/pages/blog/x-band_signal_path_at_yg.txt · Last modified: 2012/05/02 03:09 by Jim Lovell