User Tools

Site Tools


handover:aov002

This wiki is not maintained! Do not use this when setting up AuScope experiments!

AOV002

Hobart 12m:

Disk VSN: HOB+1006/16000

Data volume at beginning: 7.9GB (I assume approx 7.9 TB??)

  • 08:38 UT: 8301 GB recorded (Ross).

Katherine 12m:

Disk VSN: TR-00014/2000

Data volume at beginning: 0TB

  • The schedule start email claimed everything was fine - but mk5ke was not recording properly. It's unclear why this happened. Several “mk5cn: connection closed” messages appeared, and nothing was being recorded. The EndDIM command had no effect on the dim process. fmset took a few seconds to display values, but eventually did. I decided to reboot the mk5 via the power switch. Waiting for a few minutes and looking on the webcam showed what looked like a frozen state. Tried off, then on, but the mk5 never had lights on the front powered after this. Boot did nothing either. Contacted Jamie, now recording to mk5-2ke (USN-0169, 2TB free). Missed approximately the first hour - first real scan is 1424-418 at 120-1959a. There appears to be bad auto-correlations in DBBC channels 1 and 14, but not restarting DBBC for fear of losing more time. (Chris)
  • In gap between scans 120-2335 and 120-2346, cycled power to DBBC and reprogrammed it. No scans missed but expect a clock jump. (Jim)
  • DBBC cont cal wasn't working. Another DBBC reset required. scans 121-0004, 121-0008, 121-0010 missed. Clock jump. (Jim)
  • Another DBBC restart required, due to large difference between formatter and maser delays. (Jakob)
  • 08:42 UT: 476 GB recorded (Ross).
  • 08:44:59 UT: ALARM: error m5 -104 mk5cn: time-out, connection closed (Ross).

Yarragadee 12m:

Disk VSN: HOB-0008/960

Data volume at beginning: 0TB

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/aov002.txt · Last modified: 2015/05/04 07:22 by liza