This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
AOV002
Hobart 12m:
Disk VSN: HOB+1006/16000
Data volume at beginning: 7.9GB
Katherine 12m:
Disk VSN: TR-00014/2000
Data volume at beginning: 0TB
The schedule start email claimed everything was fine - but mk5ke was not recording properly. It's unclear why this happened. Several “mk5cn: connection closed” messages appeared, and nothing was being recorded. The EndDIM command had no effect on the dim process. fmset took a few seconds to display values, but eventually did. I decided to reboot the mk5 via the power switch. Waiting for a few minutes and looking on the webcam showed what looked like a frozen state. Tried off, then on, but the mk5 never had lights on the front powered after this. Boot did nothing either. Contacted Jamie, now recording to mk5-2ke (USN-0169, 2TB free). Missed approximately the first hour - first real scan is 1424-418 at 120-1959a. There appears to be bad auto-correlations in DBBC channels 1 and 14, but not restarting DBBC for fear of losing more time. (Chris)
In gap between scans 120-2335 and 120-2346, cycled power to DBBC and reprogrammed it. No scans missed but expect a clock jump. (Jim)
Yarragadee 12m:
Disk VSN: HOB-0008/960
Data volume at beginning: 0TB
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov002.1430438645.txt.gz · Last modified: 2015/05/01 00:04 by David Horsley