This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
aov010
Hobart 26m:
Disk VSN: NTO+0044
Data volume at beginning: 0 Gb
During setup: Telescope drives had to be manually reset, mk5ho was unresponsive and had to be revived by Jamie M.
18:00 UT Experiment started on time (Arwin)
18:00 UT Gave the following error twice “ERROR m5 -104 mk5cn: time-out, connection closed”. Everything seems to be fine, will keep an eye (Arwin)
18:31 UT Getting the follwoing two errors “error di -400 if module position exceeds number of conditioning modules” and “error sp -13 this command not supported for your equipment, check equip.ctl.” quite a bit. Wiki is no help on this (Arwin)
19:24 UT Noticed that the sum file has not been created in sched.tmp. Tried manually drudging the skd file in the tmp folder but to no avail. (Arwin)
19:26 UT Disk_pos at 330.901, unable to check as I cannot find the sum file.
Katherine 12m:
Disk VSN: HOB+0107
Data volume at beginning: 854.53
17:45 UT Reconfigred the DBBC, resynced fmset to bring mk5=dot under control. (Arwin)
18:07 UT Experiment started 7 mins late due to the above issues. First valid data was was for scan 2019-1819, source 2101-490 at 18:19:38 UT. Missed about 31 Gb (Arwin)
Yarragadee 12m:
Disk VSN:HOB+0118
Data volume at beginning: 750.591
18:00 UT Experiment started on time. (Arwin)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov010.1469647798.txt.gz · Last modified: 2016/07/27 19:29 by Warren Hankey