handover:aum018

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

AUM018

Hobart 12m

flexbuff

1730UT - Experiment started ok (Patrick).
2350UT - Halted, wrong prc setup. (Lim)
0024UT - First scan with correct datastream: 233-0024 (Lim)

Yarragadee 12m

flexbuff

1730UT - Experiment started ok (Patrick).
2157UT - Clock jump (Patrick).

Katherine 12m

flexbuff

Running aum.setup.py configured dbbc3ke okay, but failed with fila10g/ERROR when trying to configure dbbcke. Fixed by restarting the control software (v106E_120118) on dbbcke.
1730UT - Experiment started ok (Patrick).
2140UT - Antenna stuck, fixed with antenna=open and antenna=operate. Affected scans: 232-1833 to 232-2142 (Patrick).
0015UT - It seems that only xx pol recorded so far, restarted jive5ab and recording xx and xy datastream now. (Lim)

/home/www/auscope/opswiki/data/attic/handover/aum018.1597883252.txt.gz · Last modified: 2020/08/20 00:27 by Lim Chin Chuan