This wiki is not maintained! Do not use this when setting up AuScope experiments!
gt10
RadioAstron Track, gt10
Yarragadee 12m
Observer: Arwin
Summary
The signal observed was very strong and the peak was very wide (see figure below, normally we center the peak at 800 mhz and set the span to 20 mhz, this time I needed 100 mhz). I was worried that the signal might be saturating and unable to get in touch with Jim, we tried changing the variable voltage to see if it has an affect on the signal strenght.
20:30 - 21:15 UT 14 -rfpic=cross,direct
21:15 - 21:27 UT 10 -rfpic=cross,direct
21:27 - 21:35 UT 20 -rfpic=cross,direct
Unable to see any change in the signal strength on the spectrum analyser, we tried to change the modes
21:40 - 21:42 UT 20V? -rfpic=cross,cross
21:42 - 21:46 UT 20V? -rfpic=direct,direct
2146 onwards 20V? -rfpic=cross,direct
/home/www/auscope/opswiki/data/pages/handover/gt10.txt · Last modified: 2017/02/01 16:37 by Arwin Kahlon